Nissan Qashqai (2018 year). Instruction

4-72

Heater, air conditioner, audio and phone systems

played. The track plays at an increased
speed while rewinding or fast forwarding.
When the button is released, the track
returns to normal play speed.

JVH0748X

Scrolling menus:

While navigating long lists of artists,
albums or songs in the music menu, it is
possible to scroll the list by the first
character in the name. To activate char-
acter indexing, touch the “A-Z” key in the
upper right corner of the screen. Turn the
ENTER AUDIO/TUNE·SCROLL dial to
choose the number or letter to jump to
in the list and then push the ENTER
AUDIO/TUNE·SCROLL dial.
If no character is selected after a few
seconds, the display returns to normal.

Bluetooth® streaming audio

If you have a compatible Bluetooth®
audio device that is capable of playing
audio files, the device can be connected
to the vehicle’s audio system so that the
audio files on the device play through the
vehicle’s speakers.

Regulatory information:

Bluetooth® trademark:

Bluetooth® is a trademark
owned by Bluetooth SIG, Inc.
and licensed to Robert
Bosch GmbH.

JVH1583X

Example

Connecting Bluetooth® audio:

To connect your Bluetooth® audio device
to the vehicle, follow the procedure be-
low:
1.

Push the APPS·i button.

2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.

JVH0750X

4. Touch the “Connect New Device” key.
5. The system acknowledges the com-

mand and asks you to initiate con-
necting from the phone handset. The
connecting procedure of the cellular
phone varies according to each cellu-
lar phone model. See the cellular
phone owner’s manual for details.
You can also visit www.nissanusa.
com/bluetooth or www.nissan.ca/
bluetooth for instructions on connect-
ing NISSAN recommended cellular
phones.

Audio main operation:

To switch to the Bluetooth® audio mode,
push the AUX button repeatedly until the

Bluetooth® audio mode is displayed on
the screen.
The controls for the Bluetooth® audio are
displayed on the screen.

AUX device player operation

The AUX input jack is located on the lower
part of the instrument panel. (See “AUX
(Auxiliary) input jack” (P.4-75).) The AUX
input jack accepts any standard analog
audio input such as from a portable
cassette tape/CD player, MP3 player or a
laptop computer. Push the AUX button to
play a compatible device plugged into the
AUX input jack.
NISSAN strongly recommends using a
stereo mini plug cable when connecting
your music device to the audio system.
Music may not play properly when a
monaural cable is used.

Heater, air conditioner, audio and phone systems

4-73

4-74

Heater, air conditioner, audio and phone systems

USB (Universal Serial Bus) CON-
NECTION PORT

WARNING

Do not connect, disconnect or oper-
ate the USB device while driving.
Doing so can be a distraction. If
distracted you could lose control of
your vehicle and cause an accident
or serious injury.

CAUTION

. Do not force the USB device into

the USB connection port. Insert-
ing a USB device tilted or upside-
down into the port may damage
the port. Make sure that the USB
device is connected correctly to
the USB connection port.

. Do not grab the USB connection

port cover (if so equipped) when
pulling a USB device out of the
port. This could damage the port
and the cover.

. Do not leave a USB cable in a

place where it can be pulled
unintentionally. Pulling the cable

may damage the port.

Refer to your device manufacturer’s own-
er information regarding the proper use
and care of the device.

JVH0683X

The USB connection port is located on
the lower part of the instrument panel.
Insert USB memory or iPod® connector
into this port.

JVH0684X

AUX (Auxiliary) INPUT JACK

The AUX input jack is located on the lower
part of the instrument panel. The AUX
input jack accepts any standard analog
audio input such as from a portable
cassette tape/CD player, MP3 player or
laptop computer.

JVH1655X

Menu control buttons/OK button

Volume control buttons

Tuning buttons

Back button

STEERING WHEEL SWITCH FOR
AUDIO CONTROL

The audio system can be operated using
the controls on the steering wheel.

Menu control buttons/OK button

Push the

buttons to switch the

vehicle information display to audio
mode. Push the OK button until the
preferred available audio source is se-
lected.

Volume control buttons

Push the + or − button to increase or
decrease the volume.

Tuning buttons (models

without navigation system)

Availability of functions may vary depend-
ing on the media and device.

AM and FM radio:
. Push the

button for less than

1.5 seconds to select the next or the
previous preset station.

. Push the

button for more

than 1.5 seconds to seek up or down
to the next station.

SXM operation (if so equipped):
. Push the

button for less than

1.5 seconds to select the next or the
previous preset channel.

. Push the

button for more

than 1.5 seconds to select the next or
the previous available channel.

iPod®:
. Push the

button for less than

1.5 seconds to select the next or the
previous track.

Heater, air conditioner, audio and phone systems

4-75

4-76

Heater, air conditioner, audio and phone systems

CD or Bluetooth® audio:
. Push the

button for less than

1.5 seconds to select the next or the
previous track.

. Push the

button for more

than 1.5 seconds to fast forward or
rewind the track being played.

CD-MP3 or USB memory:
. Push the

button for less than

1.5 seconds to select the next or the
previous track.

. Push the

button for more

than 1.5 seconds to select the next or
the previous folder.

Tuning buttons (models

with navigation system)

Availability of functions may vary depend-
ing on the media and device.

AM and FM radio:
. Push the

button for less than

1.5 seconds to select the next or the
previous preset station and show a list
of the preset stations.

. Push the

button for more

than 1.5 seconds to seek up or down
to the next station.

SXM operation (if so equipped):
. Push the

button for less than

1.5 seconds to select the next or the
previous preset channel.

. Push the

button for more

than 1.5 seconds to go to the next or
previous category.

CD, iPod®, USB memory or Bluetooth®
audio:
. Push the

button for less than

1.5 seconds to select the next or the
previous track.

. Push the

button for more

than 1.5 seconds to fast forward or
rewind the track being played.

Back button (models with naviga-
tion system)

Push the back button to return to pre-
vious screen or cancel the current selec-
tion.

SAA2102

Type A (if so equipped)

SAA2374

Type B (if so equipped)

ANTENNA

To remove the antenna, hold the bottom
of the antenna and turn it counterclock-
wise.
To install the antenna, turn the antenna
clockwise and tighten.

CAUTION

. To avoid damaging or deforming

the antenna, be sure to remove
the antenna under the following
conditions.

— The vehicle enters a garage

with a low ceiling.

— The vehicle is covered with a

car cover.

. Be sure that antenna is removed

before the vehicle enters an auto-
matic car wash.

. Always properly tighten the an-

tenna rod during installation.
Otherwise, the antenna rod may
break during vehicle operation.

SAA0451

CD/USB MEMORY CARE AND
CLEANING

. Handle a CD by its edges. Never touch

the surface of the disc. Do not bend
the disc.

. Always place the discs in the storage

case when they are not being used.

. To clean a disc, wipe the surface from

the center to the outer edge using a
clean, soft cloth. Do not wipe the disc
using a circular motion.
Do not use a conventional record
cleaner or alcohol intended for indus-
trial use.

. A new disc may be rough on the inner

and outer edges. Remove the rough
edges by rubbing the inner and outer
edges with the side of a pen or pencil
as illustrated.

USB memory

. Do not touch the terminal portion of

the USB memory.

. Do not place heavy objects on the USB

memory.

. Do not store the USB memory in very

humid locations.

. Do not expose the USB memory to

direct sunlight.

. Do not spill any liquids on the USB

memory.

Refer to the USB memory owner’s manual
for the details.

Heater, air conditioner, audio and phone systems

4-77

4-78

Heater, air conditioner, audio and phone systems

This vehicle is equipped with smartphone
Integration technology. This allows many
compatible smartphone applications to
be displayed and easily controlled
through the vehicle’s touch screen.
NOTE:

A compatible smartphone and registra-
tion is required to use mobile applica-
tions or to access connected features of
certain vehicle applications.

REGISTERING WITH NISSANCON-
NECT

MOBILE APPS

To use the smartphone Integration fea-
ture, it is necessary for the user to
register. In order to register, visit the
NissanConnect

website and sign up or

create an account through the prompts
on the NissanConnect

Mobile Apps.

Once registered, download the Nissan-
Connect

Mobile Apps from your com-

patible phone’s application download
source and then log into the application.
If you already have an account created
through the App, please log in.
NissanConnect

website:

For U.S.
www.nissanusa.com/connect/
For Canada
www.nissan.ca/nissanconnect (English)
w w w . n i s s a n . c a / n i s s a n c o n n e c t / f r

(French)

CONNECT PHONE

To use this feature, a compatible smart-
phone must be connected via Bluetooth®
or USB connection port to the vehicle. For
more information on connecting your
phone, see “Bluetooth® Hands-Free
Phone System (models with navigation
system)” (P.4-93).
NOTE:

. For iPhone®, NissanConnect

Mo-

bile Apps REQUIRES the phone to be
plugged in via USB connection port.

. For Android phones, NissanCon-

nect

Mobile Apps REQUIRES the

phone to be paired via Bluetooth®.

APPLICATION DOWNLOAD

Once connected, the NissanConnect

Mobile Apps will search your phone to
determine which compatible applications
are currently installed. The user will then
choose which apps they want to bring
into their vehicle from the list of apps
within the “Manage My Apps” section of
the NissanConnect

Mobile Apps on

their smartphone. The vehicle will then
download the in-vehicle interface for
each of these compatible applications.
Once downloaded, the user can access
their selected smartphone applications
through the vehicle touch screen. For

more information on application avail-
ability see NissanConnect

website.

NissanConnect

website:

For U.S.
www.nissanusa.com/connect/
For Canada
www.nissan.ca/nissanconnect (English)
w w w . n i s s a n . c a / n i s s a n c o n n e c t / f r
(French)

NISSANCONNECT

MOBILE APPS

SMARTPHONE INTEGRATION (if so
equipped)

NissanConnect

Services is a suite of

telematics tools that provide emergency
preparedness, remote access, customiz-
able alerts and convenience services. This
feature is an option on navigation system
equipped vehicles. For additional infor-
mation, refer to the separate Navigation
System Owner’s Manual.

GENERAL INFORMATION

Apple Siri® Eyes Free personal assistant
can be accessed from the vehicle. Siri®
Eyes Free can be accessed in Siri® Eyes
Free mode to reduce user distraction. In
this mode, Siri® Eyes Free is available for
interaction by voice control. After con-
necting a compatible Apple device by
using Bluetooth®, Siri® Eyes Free can be
activated using the

button on the

steering wheel.
Siri® is a trademark of Apple Inc., regis-
tered in the U.S. and other countries.

INFO:

. Some Siri® Eyes Free functions, such

as opening apps, may not be available
during driving.

. For best results, always update your

device to the latest software version.

. Keep the interior of the vehicle as

quiet as possible. Close the windows
to eliminate the surrounding noises
(traffic noises, vibration sounds, etc.),
which may prevent the system from
recognizing the voice commands cor-
rectly.

. For functions that can be used in Siri®

Eyes Free, please refer to the Apple
website.

REQUIREMENTS

Siri® is available on the iPhone® 4S or
later. Devices released before iPhone® 4S
are not supported by the Siri® Eyes Free
system.
Visit www.apple.com/ios/siri for details
about device compatibility.
Siri® must be enabled on the phone.
Please check phone settings.
If the device has a lock screen, Siri® must
be accessible from the lock screen. Please
check phone settings.
For best results, always update your
device to the latest software version.

Heater, air conditioner, audio and phone systems

4-79

NISSANCONNECT

SERVICES (if

so equipped)

SIRI® EYES FREE

4-80

Heater, air conditioner, audio and phone systems

JVH1592X

SIRI® EYES FREE ACTIVATION

Siri® Eyes Free function can be activated
using the

button on the steering

wheel.
1.

Connect a Siri® Eyes Free enabled
iPhone® to the vehicle. (See “Connect-
ing procedure” (P.4-96) or “Initializa-
tion” (P.4-86).)

2. After the Bluetooth® connection is

established, push and hold the
button to activate the Siri® Eyes Free
function.
Depending on the model, Siri® Eyes
Free activation option (“Short Press” or
“Long Press”) can be selected after
connecting the iPhone®. The activa-

tion option can also be changed from
the Phone or Bluetooth® settings
menu. (See “Changing Siri® Eyes Free
Settings (models with navigation sys-
tem)” (P.4-80) or “Changing Siri® Eyes
Free Settings (models without naviga-
tion system)” (P.4-81).)

OPERATING SIRI® EYES FREE

Push or push and hold the

button.

2. Speak your command and then listen

to the Siri® Eyes Free reply.

After starting Siri® Eyes Free, push the
button again within five seconds of the
end of the Siri® Eyes Free announcement
to extend the session.
Example 1 - Playing music

Push or push and hold the

button.

2. Say “Play (artist name, song name,

etc.)”.

3. Your vehicle will automatically change

to Bluetooth® audio or iPod® mode*
when the music starts playing. Mode
selection is determined by the phone.
*: If the iPhone® is also connected with
the USB cable.

If the audio track does not start playing
automatically after Siri® Eyes Free ends,
try changing the track or audio source to
resume playback.

NOTE:

For best results, use the native music
app. Performance of music control
function while using Podcasts, Audio-
book or other third party music apps
may vary and is controlled by the
iPhone®.

Example 2 - Replying to text messages

If a compatible iPhone® is connected
and “Show Notifications” of the
iPhone® settings is enabled, the vehi-
cle will display a notification for new
incoming text messages.

2. After reading the message, push or

push and hold the

button to reply

using Siri® Eyes Free.

3. After a beep sounds, say “Text mes-

sage” or a similar command to reply
using Siri® Eyes Free.

CHANGING SIRI® EYES FREE SET-
TINGS (models with navigation
system)

Settings for Siri® Eyes Free can be found
in the Bluetooth® settings menu.
1.

Push the APPS·i button.

2. Touch the “Settings” key.
3. Touch the “Phone & Bluetooth” key.
4. Touch the “Phone settings” key.

5. Touch the “Start Siri by” key.
6. Select “Short Press” or “Long Press” to

set the activation.

CHANGING SIRI® EYES FREE SET-
TINGS (models without navigation
system)

Settings for Siri® Eyes Free can be found
in the Bluetooth® settings menu.

JVH1626X

Push the ENTER SETTING button

2. Use the ENTER SETTING button

select “Bluetooth” and then push the
ENTER SETTING button

3. Use the ENTER SETTING button

select “Siri” and then push the ENTER
SETTING button

4. Select “Short Press” or “Long Press”

using the ENTER SETTING button
and then push the ENTER SETTING
button

Heater, air conditioner, audio and phone systems

4-81

4-82

Heater, air conditioner, audio and phone systems

TROUBLESHOOTING GUIDE

Symptom

Cause and Countermeasure

Cannot access Siri® Eyes Free from the
switch on the steering wheel

Check if a Bluetooth® connection is established between the iPhone® and the system.
Check if Siri® is enabled on the device. On your phone, go to Siri® setting.
Check that Siri® can be accessed from the device lock screen. This can be set in the settings menu of
your phone.
Check the settings for Siri® Eyes Free activation on the vehicle audio system. If the setting is “Long
Press”, you must push and hold the

button on the steering wheel for more than 1.5 seconds to start

Siri® Eyes Free. If the setting is “Short Press”, a short push and release of the button should start Siri®
Eyes Free.

Audio source does not change automati-
cally to iPod® or Bluetooth® Audio mode

For best results, use the native music app. Performance of music control function while using Podcasts,
Audiobook or other third party music apps may vary.
For best results, play media already stored on your device. Streaming music or playback from cloud
storage may degrade performance.
Models with navigation system:
Switch the source manually by pushing the AUX button on the vehicle audio system or the menu
control buttons/OK button on the steering wheel.
Models without navigation system:
Switch the source manually by pushing the

button on the vehicle audio system or the

menu control buttons/OK button on the steering wheel.

Play, pause, next track, previous track or
play timer does not work

For best results, use the native music app. Performance of music control function while using Podcasts,
Audiobook or other third party music apps may vary and is controlled by the device.

Cannot hear any music/audio being played
back from a connected iPhone®

Check that the audio source is set to Bluetooth® Audio or iPod® mode. A USB connection is required for
iPod® mode.

Cannot hear map turn-by-turn direction
guidance from a connected iPhone®

Check that the audio source is set to Bluetooth® Audio or iPod® mode. A USB connection is required for
iPod® mode.

Cannot receive text message notifications
on the vehicle audio system

Check if “Show Notifications” is enabled on your phone. On your phone, go to Bluetooth® settings. Find
the device name, like “My Car”. Touch the

icon on your phone. Turn on “Show Notifications”.

Cannot reply to text message notifications
using Siri® Eyes Free

After receiving an incoming text message, follow the on-screen guidance. Push or push and hold the

button on the steering wheel for Siri® Eyes Free. After Siri® Eyes Free starts, say “Text Message”.

When installing a car phone or a CB radio
in your vehicle, be sure to observe the
following precautions, otherwise the new
equipment may adversely affect the elec-
tronic control modules and electronic
control system harness.

WARNING

. A cellular phone should not be

used for any purpose while driv-
ing so full attention may be given
to vehicle operation. Some juris-
dictions prohibit the use of cellu-
lar phones while driving.

. If you must make a call while your

vehicle is in motion, the hands-
free cellular phone operational
mode (if so equipped) is highly
recommended. Exercise extreme
caution at all times so full atten-
tion may be given to vehicle
operation.

. If a conversation in a moving

vehicle requires you to take
notes, pull off the road to a safe
location and stop your vehicle
before doing so.

CAUTION

. Keep the antenna as far away as

possible from the electronic con-
trol modules.

. Keep the antenna wire more than

8 in (20 cm) away from the
electronic control system har-
ness. Do not route the antenna
wire next to any harness.

. Adjust the antenna standing-

wave ratio as recommended by
the manufacturer.

. Connect the ground wire from the

CB radio chassis to the body.

. For details, it is recommended

you visit a NISSAN dealer.

WARNING

. Use a phone after stopping your

vehicle in a safe location. If you
have to use a phone while driving,
exercise extreme caution at all
times so full attention may be
given to vehicle operation.

. If you are unable to devote full

attention to vehicle operation
while talking on the phone, pull
off the road to a safe location and
stop your vehicle.

CAUTION

To avoid draining the vehicle battery,
use a phone after starting the en-
gine.

Your vehicle is equipped with the Blue-
tooth® Hands-Free Phone System. If you
have a compatible Bluetooth® enabled
cellular phone, you can set up the wire-
less connection between your cellular
phone and the in-vehicle phone module.
With Bluetooth® wireless technology, you
can make or receive a hands-free tele-
phone call with your cellular phone in the

Heater, air conditioner, audio and phone systems

4-83

CAR PHONE OR CB RADIO

Bluetooth® HANDS-FREE PHONE SYSTEM
(models without navigation system)

4-84

Heater, air conditioner, audio and phone systems

vehicle.
Once your cellular phone is connected to
the in-vehicle phone module, no other
phone connecting procedure is required.
Your phone is automatically connected
with the in-vehicle phone module when
the ignition switch is placed in the ACC or
ON position with the previously con-
nected cellular phone turned on and
carried in the vehicle.
NOTE:

Some devices require the user to accept
connections to other Bluetooth® de-
vices. If your phone does not connect
automatic ally to the system, consult
the phone’s owner’s manual for details
on device operation.

You can connect up to five different
Bluetooth® cellular phones to the in-
vehicle phone module. However, you can
talk on only one cellular phone at a time.
Before using the Bluetooth® Hands-Free
Phone System, refer to the following
notes.
. Set up the wireless connection be-

tween a compatible cellular phone
and the in-vehicle phone module be-
fore using the Hands-Free Phone
System.

. Some Bluetooth® enabled cellular

phones may not be recognized by
the in-vehicle phone module. Please
visit www.nissanusa.com/bluetooth
or www.nissan.ca/bluetooth for a re-
commended phone list.

. You will not be able to use a hands-

free phone under the following condi-
tions:
— Your vehicle is outside of the cel-

lular service area.

— Your vehicle is in an area where it is

difficult to receive a cellular signal;
such as in a tunnel, in an under-
ground parking garage, near a tall
building or in a mountainous area.

— Your cellular phone is locked to

prevent it from being dialed.

. When the radio wave condition is not

ideal or ambient sound is too loud, it
may be difficult to hear the other
person’s voice during a call.

. Do not place the cellular phone in an

area surrounded by metal or far away
from the in-vehicle phone module to
prevent tone quality degradation and
wireless connection disruption.

. While a cellular phone is connected

through the Bluetooth® wireless con-
nection, the battery power of the
cellular phone may discharge quicker
than usual. The Bluetooth® Hands-

Free Phone System cannot charge
cellular phones.

. If the Bluetooth® Hands-Free Phone

System seems to be malfunctioning,
visit www.nissanusa.com/bluetooth
or www.nissan.ca/bluetooth for trou-
bleshooting help.

. Some cellular phones or other devices

may cause interference or a buzzing
noise to come from the audio system
speakers. Storing the device in a
different location may reduce or elim-
inate the noise.

. Refer to the cellular phone owner’s

manual regarding the telephone
charges, cellular phone antenna and
body, etc.

REGULATORY INFORMATION

FCC Regulatory information

. CAUTION: To maintain compliance

with FCC’s RF exposure guidelines,
use only the supplied antenna. Un-
authorized antenna, modification, or
attachments could damage the trans-
mitter and may violate FCC regula-
tions.

. Operation is subject to the following

two conditions:
1) this device may not cause interfer-

ence and

2) this device must accept any inter-

ference, including interference
that may cause undesired opera-
tion of the device.

IC Regulatory information

. Operation is subject to the following

two conditions: (1) this device may not
cause interference, and (2) this device
must accept any interference, includ-
ing interference that may cause un-
desired operation of the device.

. This Class B digital apparatus meets

all requirements of the Canadian In-
terference-Causing Equipment Regu-
lations.

Bluetooth® trademark

Bluetooth® is a trademark
owned by Bluetooth SIG, Inc.,
and licensed to Visteon Cor-
poration.

USING THE SYSTEM

The voice recognition system allows
hands-free operation of the Bluetooth®
Hands-Free Phone System.
If the vehicle is in motion, some com-
mands may not be available so full
attention may be given to vehicle opera-
tion.

JVH1627X

Control buttons and microphone

Control buttons:

The control buttons for the Bluetooth®
Hands- Free Phone System are located on
the steering wheel.
1.

Volume control buttons

2. Menu control buttons/OK button

While using the voice recognition sys-
tem, push the

buttons to

manually control the phone system.

button

Push the

button to initiate a voice

recognition operation session or an-
swer an incoming call.

INFO:

If the “Siri” on the Bluetooth® settings
menu is set to “Short Press”, pushing
and holding the

button initiates a

voice recognition operation session
for Hands-Free Phone operation. (See
“Bluetooth® settings” (P.4-92).)
You can also use the

button to

interrupt the system feedback and
give a command at once. See “Giving
voice commands” (P.4-87) in this sec-
tion for more information.

button

Push the

button to reject the call.

While the voice recognition system is
active, push and hold the

button

to quit the voice recognition system at
any time.

Microphone:

Microphone is located near the map
lights.

Manual control:

While using the Voice Recognition system,
it is also possible to select menu options
manually by using the steering wheel
controls instead of speaking voice com-
mands. To activate the manual control
mode, push the

button on the steer-

ing wheel to access the phone menu and
then push the menu control buttons.

Heater, air conditioner, audio and phone systems

4-85

4-86

Heater, air conditioner, audio and phone systems

The manual control mode does not allow
dialing a phone number by digits. The
user may select an entry from the Phone-
book or Recent Calls lists. To reactivate
Voice Recognition, exit the manual con-
trol mode by pushing and holding the
button. At that time, pushing the
button will start the Bluetooth® Hands-
Free Phone System.

Choosing a language

You can interact with the Bluetooth®
Hands-Free Phone System using several
languages that are available. For opera-
tions to change the language, see “Audio
main operation” (P.4-48) or “Audio main
operation” (P.4-56).

Changing voice feedback volume

If you want to adjust the volume of the
voice feedback, push the volume control
buttons on the steering wheel while
being provided with feedback. You can
also use the Power/VOL dial on the
control panel.

Initialization

When the ignition switch is placed in the
ACC or ON position, voice recognition is
initialized, which takes a few seconds. If
the

button is pushed before the

initialization completes, the system will
announce “Hands-free phone system not
ready” and will not react to voice com-
mands.

Connecting procedure:

NOTE:

The connecting procedure must be
performed when the vehicle is station-
ary. If the vehicle starts moving during
the procedure, the procedure will be
cancelled.

JVH1626X

To connect a phone to the Bluetooth®
Hands-Free Phone System;
1.

Push the ENTER SETTING button

2. Use the ENTER SETTING button

select “Bluetooth” and then push the
ENTER SETTING button

3. Select “Add Phone” and then push the

ENTER SETTING button

4. When a message with a PIN appears

on the screen, operate the Bluetooth®
phone to enter the PIN.

The connecting procedure varies accord-
ing to each phone. See the phone’s own-
er’s manual for details.

Giving voice commands

To operate voice recognition, push and
release the

button located on the

steering wheel. After the tone sounds,
speak a command.
The command given is picked up by the
microphone, and voice feedback is given
when the command is accepted.
. If you need to hear the available

commands for the current menu
again, say “Help” and the system will
repeat them.

. If a command is not recognized, the

system announces, “Command not
recognized. Please try again.” Make
sure the command is said exactly as
prompted by the system and repeat
the command in a clear voice.

. If you want to go back to the previous

command, you can say “Go back” or
“Correction” any time the system is
waiting for a response.

. You can cancel a command when the

system is waiting for a response by
saying, “Cancel” or “Quit”. The system
announces “Cancel” or “Quit” and ends
the voice recognition operation ses-
sion. You can also push and hold the

button on the steering wheel at

any time to end the voice recognition
operation session. Whenever the voice

recognition operation session is can-
celled, a double beep is played to
indicate you have exited the system.

. If you want to adjust the volume of the

voice feedback, push the volume con-
trol buttons on the steering wheel
while being provided with feedback.
You can also use the Power/VOL dial
on the control panel.

Voice Prompt Interrupt:

In most cases you can interrupt the voice
feedback to speak the next command by
pushing the

button on the steering

wheel. After interrupting the system, wait
for a beep before speaking your com-
mand.

One Shot Call:

To use the system faster, you may speak
the second level commands with the
main menu command on the main menu.
For example, push the

button and

after the tone say, “Call Redial”.

Operating tips:

To get the best performance out of the
voice recognition system, observe the
following:
. Keep the interior of the vehicle as

quiet as possible. Close the windows
to eliminate surrounding noises (traf-
fic noises, vibration sounds, etc.),

which may prevent the system from
recognizing voice commands cor-
rectly.

. Wait until the tone sounds before

speaking a command. Otherwise, the
command will not be received prop-
erly.

. Start speaking a command within five

seconds after the tone sounds.

. Speak in a natural voice without

pausing between words.

Voice commands

Voice commands can be used to operate
the Bluetooth® Hands-Free Phone Sys-
tem. Push the

button to bring up the

phone command menu. The available
options are:
. Call

. Phonebook

. Recent Calls

. Messaging (if available)

. Select Phone
Call:

For more information on the “Call” com-
mand, see “Making a call” (P.4-89).

Phonebook:

The following commands are available
under “Phonebook”:

Heater, air conditioner, audio and phone systems

4-87

Nissan Qashqai (2018 year). Instruction - part 16