wheel, insert the key and turn it gently
IGNITION SWITCH POSITIONS
LOCK: Normal parking position (0)
The engine can be turned off without lock-
ACC: (Accessories) (2)
This position activates electrical accesso-
ON: Normal operating position (3)
This position turns on the ignition system
This position starts the engine. As soon as
NISSAN VEHICLE IMMOBILIZER
The NISSAN Vehicle Immobilizer System
If the engine fails to start using a registered
1. Leave the ignition switch in the ON po-
sition for approximately 5 seconds.
2. Place the ignition switch in the OFF or
LOCK position, and wait approximately
3. Repeat steps 1 and 2.
4. Restart the engine while holding the
device (which may have caused the in-
If the no start condition re-occurs, NISSAN
∙ Make sure the area around the vehicle is
∙ Check fluid levels such as engine oil,
coolant, brake and clutch fluid (if so
∙ Check that all windows and lights are
∙ Visually inspect tires for their appear-
ance and condition. Also check tires for
∙ Lock all doors.
∙ Position seat and adjust head re-
∙ Adjust inside and outside mirrors.
∙ Fasten seat belts and ask all passen-
gers to do likewise.
∙ Check the operation of warning lights
when the key is turned to the ON posi-
BEFORE STARTING THE ENGINE
Starting and driving