Nissan Frontier D40. Manual - part 845

CHASSIS AND BODY MAINTENANCE

MA-61

< ON-VEHICLE MAINTENANCE >

• Check the function of the buckles by inserting the seat belt tongue and checking for proper engagement of

the buckle and press the button on the buckle to check for proper release of the seat belt tongue.

CAUTION:

• After any collision, inspect all seat belt assemblies, including retractors and other attached compo-

nents, such as the guide rail set. NISSAN recommends replacing all seat belt assemblies in use dur-
ing a collision, unless they are not damaged and are inspected to confirm they are operating
properly after a minor collision.
Also inspect all seat belt assemblies that are not in use during a collision, and replace any compo-
nents if damaged or not operating properly. The seat belt pre-tensioner should be replaced even if
the seat belts are not in use during a frontal collision where the driver and passenger air bags have
been deployed.

• If any component of the seat belt assembly is suspected of being damaged or not operating prop-

erly, do not repair the component. Replace the components as an assembly.

• If the seat belt webbing is cut, frayed, or damaged then replace the seat belt assembly.
• Never lubricate the seat belt buckle or tongue.
• When replacing any seat belt assembly always use a Genuine NISSAN seat belt assembly.

MIR-1

DRIVER CONTROLS

SECTION

MIR

MIR

CONTENTS

MIRRORS

COMPONENT DIAGNOSIS ..........................

DOOR MIRROR ...................................................

Wiring Diagram — Door Mirror (With Heated Mir-
rors) — ......................................................................

Wiring Diagram — Door Mirror (Without Heated
Mirrors) — .................................................................

INSIDE MIRROR .................................................