|
|
TM-156 < SYMPTOM DIAGNOSIS > SYSTEM SYMPTOM 48 Does not Does not change M 4 → M 3 . ON vehicle 1. Transmission range switch 2. Fluid level and state 3. Control cable adjustment 4. Manual mode switch 5. CAN communication line 6. Control valve with TCM OFF vehicle 7. Front brake (brake band) 8. Input clutch 49 Does not change M 3 → M 2 . ON vehicle 1. Transmission range switch 2. Fluid level and state 3. Control cable adjustment 4. Manual mode switch 5. CAN communication line 6. Control valve with TCM OFF vehicle 7. Front brake (brake band) 8. Input clutch 9. High and low reverse clutch 50 Does not change M 2 → M 1 . ON vehicle 1. Transmission range switch 2. Fluid level and state 3. Control cable adjustment 4. Manual mode switch 5. CAN communication line 6. Control valve with TCM OFF vehicle 7. Input clutch 8. High and low reverse clutch 9. Direct clutch 51 Cannot be changed to ON vehicle 1. Manual mode switch 2. Input speed sensor 3. CAN communication line 52 Others Shift point is high in ON vehicle 1. Output speed sensor and vehicle speed signal , 2. Accelerator pedal position sensor 3. CAN communication line 4. ATF temperature sensor 5. Control valve with TCM No. Items Symptom Condition Diagnostic Item Reference page |