|
|
PWC-52 < DTC/CIRCUIT DIAGNOSIS > [FRONT WINDOW ANTI-PINCH] POWER WINDOW SERIAL LINK POWER WINDOW SERIAL LINK POWER WINDOW MAIN SWITCH POWER WINDOW MAIN SWITCH : Diagnosis Procedure INFOID:0000000009653318 1. CHECK POWER WINDOW SWITCH OUTPUT SIGNAL 1. Turn ignition switch ON. 2. Check signal between power window main switch harness connector and ground using an oscilloscope. Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident" . NO >> GO TO 2. 2. CHECK POWER WINDOW SERIAL LINK SIGNAL 1. Turn ignition switch OFF. 2. Disconnect power window main switch connector. 3. Turn ignition switch ON. 4. Check voltage between power window main switch harness connector and ground. Is the inspection result normal? YES >> Replace power window main switch. Refer to PWC-68, "Removal and Installation" NO >> GO TO 3. 3. CHECK POWER WINDOW SERIAL LINK CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect BCM connector. 3. Check continuity between BCM harness connector and power window main switch harness connector. 4. Check continuity between BCM harness connector and ground. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-98, "Removal and Installation" (+) (–) Signal (Reference value) Power window main switch Connector Terminal D5 14 Ground JPMIA0013GB (+) (–) Voltage (V) Power window main switch Connector Terminal D5 14 Ground 9 – 16 BCM Power window main switch Continuity Connector Terminal Connector Terminal M121 8 D5 14 Existed BCM Ground Continuity Connector Terminal M121 8 Not existed |