|
|
INL-60 < DTC/CIRCUIT DIAGNOSIS > LUGGAGE ROOM LAMP CIRCUIT LUGGAGE ROOM LAMP CIRCUIT Description INFOID:0000000009653485 Controls the luggage room lamp and automatic back door close switch illumination (ground side) to turn the Diagnosis Procedure INFOID:0000000009653486 CAUTION: Before performing the diagnosis, check that the following are normal. 1. CHECK LUGGAGE ROOM LAMP OUTPUT 1. Turn ignition switch OFF. 2. Remove the luggage room bulb. 3. Disconnect automatic back door close switch connector. 4. Check continuity between BCM harness connector and ground. Is the inspection result normal? YES >> GO TO 2. Fixed ON>>GO TO 3. BCS-98, "Removal and Installation" 2. CHECK LUGGAGE ROOM LAMP OPEN CIRCUIT 1. Disconnect BCM connector. 2. Check continuity between BCM harness connector and luggage room lamp harness connector. 3. Check continuity between BCM harness connector and automatic back door close switch harness con- Is the inspection result normal? YES >> Replace luggage room lamp or automatic back door close switch. NO >> Repair or replace harnesses. 3. CHECK LUGGAGE ROOM LAMP SHORT CIRCUIT 1. Disconnect BCM connector. 2. Check continuity between BCM harness connector and ground. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-98, "Removal and Installation" BCM Ground Condition Continuity Connector Terminal M122 49 Back door Open Existed Closed Not existed BCM Luggage room lamp Continuity Connector Terminal Connector Terminal M122 49 B51 2 Existed BCM Automatic back door close switch Continuity Connector Terminal Connector Terminal M122 49 D169 4 Existed BCM Ground Continuity Connector Terminal M122 49 Not existed |