Nissan Quest E52. Manual - part 424

DLK-410

< SYMPTOM DIAGNOSIS >

AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK AUTOMATIC SLIDING DOOR WARNING BUZZER

Check automatic sliding door warning buzzer.
• Sliding door LH: Refer to 

DLK-365, "SLIDING DOOR LH : Diagnosis Procedure"

.

• Sliding door RH: Refer to 

DLK-366, "SLIDING DOOR RH : Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or rereplace the malfunctioning parts.

3.

REPLACE SLIDING DOOR CONTROL UNIT

1.

Replace sliding door control unit. Refer to 

DLK-500, "RH : Removal and Installation"

 (RH) or 

DLK-500,

"LH : Removal and Installation"

 (LH).

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

SLIDING DOOR AUTO CLOSURE FUNCTION

SLIDING DOOR AUTO CLOSURE FUNCTION : Description

INFOID:0000000009649402

Automatic sliding door system sliding door auto closure function does not operate.

SLIDING DOOR AUTO CLOSURE FUNCTION : Diagnosis Procedure

INFOID:0000000009649403

1.

CHECK DTC WITH SLIDING DOOR CONTROL UNIT

Check that DTC is not detected with sliding door control unit.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK SLIDING DOOR HANDLE SWITCH

Check sliding door handle switch.
• Sliding door LH: Refer to 

DLK-326, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-328, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK FULL LATCH SWITCH

Check full latch switch.
• Sliding door LH: Refer to 

DLK-318, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-320, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK NEUTRAL SWITCH

Check neutral switch.
• Sliding door LH: Refer to 

DLK-322, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-324, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK HALF LATCH SWITCH

Check half latch switch.

AUTOMATIC SLIDING DOOR SYSTEM DOES NOT OPERATE

DLK-411

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

Refer to 

DLK-296, "SLIDING DOOR CONTROL UNIT : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6

NO

>> Repair or replace the malfunctioning parts.

6.

CHECK SLIDING DOOR CLOSURE MOTOR

Check sliding door closure motor.
• Sliding door LH: Refer to 

DLK-363, "SLIDING DOOR LH : Diagnosis Procedure"

.

• Sliding door RH: Refer to 

DLK-363, "SLIDING DOOR RH : Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Repair or replace the malfunctioning parts.

7.

REPLACE SLIDING DOOR CONTROL UNIT

1.

Replace sliding door control unit. Refer to 

DLK-500, "RH : Removal and Installation"

 (RH) or 

DLK-500,

"LH : Removal and Installation"

 (LH).

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

DLK-412

< SYMPTOM DIAGNOSIS >

AUTOMATIC SLIDING DOOR OPEN/CLOSE FUNCTION DOES NOT OPERATE

AUTOMATIC SLIDING DOOR OPEN/CLOSE FUNCTION DOES NOT OP-
ERATE

ALL SWITCHES

ALL SWITCHES : Description

INFOID:0000000009649404

Automatic sliding door system auto open/close function does not operate using all switches.

ALL SWITCHES : Diagnosis Procedure

INFOID:0000000009649405

1.

CHECK AUTOMATIC DOOR MAIN SWITCH POSITION

Check automatic door main switch is in the ON position.

Is the inspection result normal?

YES

>> GO TO 2

NO

>> Press automatic door main switch to ON position.

2.

CHECK DTC WITH SLIDING DOOR MAIN SWITCH

Check that DTC is not detected with sliding door control unit.
Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

3.

CHECK AUTOMATIC DOOR MAIN SWITCH

Check automatic door main switch.
Refer to 

DLK-284, "SLIDING DOOR CONTROL UNIT : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK FUEL FILLER LID STATUS SWITCH

Check fuel filler lid status switch.
Refer to 

DLK-338, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK POWER SUPPLY AND GROUND CIRCUIT

Check sliding door control unit power supply and ground circuit.
Refer to 

DLK-239, "SLIDING DOOR CONTROL UNIT : Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CHECK SLIDING DOOR LOCK RELEASE ACTUATOR

Check sliding door lock release actuator.
• Sliding door LH: Refer to 

DLK-360, "SLIDING DOOR LH : Diagnosis Procedure"

.

• Sliding door RH: Refer to 

DLK-361, "SLIDING DOOR RH : Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Repair or replace the malfunctioning parts.

7.

CHECK CLUTCH

Check clutch.
• Sliding door LH: Refer to 

DLK-355, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-356, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

AUTOMATIC SLIDING DOOR OPEN/CLOSE FUNCTION DOES NOT OPERATE

DLK-413

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

YES

>> GO TO 8.

NO

>> Repair or replace the malfunctioning parts.

8.

CHECK AUTOMATIC SLIDING DOOR MOTOR

Check automatic sliding door motor.
• Sliding door LH: Refer to 

DLK-358, "SLIDING DOOR LH : Diagnosis Procedure"

.

• Sliding door RH: Refer to .

DLK-358, "SLIDING DOOR RH : Diagnosis Procedure"

Is the inspection result normal?

YES

>> GO TO 9.

NO

>> Repair or replace the malfunctioning parts.

9.

CHECK HALF LATCH SWITCH

Check half latch switch.
Refer to 

DLK-296, "SLIDING DOOR CONTROL UNIT : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 10.

NO

>> Repair or replace the malfunctioning parts.

10.

CHECK FULL LATCH SWITCH

Check full latch switch.
• Sliding door LH: Refer to 

DLK-318, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-320, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 11.

NO

>> Repair or replace the malfunctioning parts.

11.

CHECK SLIDING DOOR SWITCH

Check sliding door switch.
• Sliding door LH: Refer to 

DLK-315, "SLIDING DOOR LH : Component Function Check"

.

• Sliding door RH: Refer to 

DLK-316, "SLIDING DOOR RH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 12.

NO

>> Repair or replace the malfunctioning parts.

12.

REPLACE SLIDING DOOR CONTROL UNIT

1.

Replace sliding door control unit. Refer to 

DLK-500, "RH : Removal and Installation"

 (RH) or 

DLK-500,

"LH : Removal and Installation"

 (LH).

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

OUTSIDE HANDLE

OUTSIDE HANDLE : Description

INFOID:0000000009649406

Automatic sliding door system auto open/close function does not operate using sliding door outside handle.

OUTSIDE HANDLE : Diagnosis Procedure

INFOID:0000000009649407

1.

CHECK DTC WITH SLIDING DOOR CONTROL UNIT

Check that DTC is not detected with sliding door control unit.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Perform trouble diagnosis relevant to DTC indicated.

2.

CHECK AUTO OPEN/CLOSE FUNCTION

Check automatic sliding door system auto open/close function.