Nissan Quest E52. Manual - part 415

 

  Index      Nissan     Nissan Quest E52 (2011-2014 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  413  414  415  416   ..

 

 

Nissan Quest E52. Manual - part 415

 

 

DLK-374

< SYMPTOM DIAGNOSIS >

DOOR DOES NOT LOCK/UNLOCK WITH DOOR REQUEST SWITCH

Refer to 

DLK-269, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK OUTSIDE KEY ANTENNA

Check outside key antenna (rear bumper).
Rear bumper: Refer to 

DLK-236, "DTC Logic"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-98, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

DLK-375

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

Diagnosis Procedure

INFOID:0000000009649340

1.

CHECK INTELLIGENT KEY

For Intelligent Key that cannot be used for door lock and unlock, check that the Intelligent Key belongs to the
vehicle to be checked.

Does the Intelligent Key belong to the vehicle to checked?

YES

>> GO TO 2.

NO

>> Check Intelligent Key button operation with registered Intelligent Key belonging to the vehicle.

2.

CHECK INTELLIGENT KEY LOW BATTERY WARNING

Check that the Intelligent Key low battery warning is operated.

Is the Intelligent Key low battery warning operated?

YES

>> GO TO 6.

NO-1

>> With another registered Intelligent Key: GO TO 3.

NO-2

>> Without another registered Intelligent Key: GO TO 4.

3.

CHECK INTELLIGENT KEY BUTTON OPERATION

Check that door lock and unlock can be performed by operating the buttons of another registered Intelligent
Key.

Can door lock and unlock be performed with another registered Intelligent Key?

YES

>> GO TO 4.

NO

>> GO TO 7.

4.

CHECK ENGINE START

While depressing the brake pedal, contact the backside of the Intelligent Key that cannot be used to perform
door lock and unlock operation to the push-button ignition switch. Operate the push-button ignition switch, and
check that the vehicle is in START status.
Is the vehicle in START status?

YES

>> GO TO 6.

NO

>> GO TO 5.

5.

CHECK INTELLIGENT KEY

Check the inside of the Intelligent Key for rust or corrosion by water. Simultaneously check the internal circuits
for damage.
Is the vehicle in START status?

YES

>> GO TO 6.

NO

>> Replace Intelligent Key.

6.

CHECK INTELLIGENT KEY BATTERY

Check the Intelligent Key battery.
Refer to 

DLK-275, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Replace Intelligent Key battery.

7.

CHECK POWER DOOR LOCK OPERATION

Check door lock/unlock using door lock and unlock switch.

Does door lock/unlock using door lock and unlock switch?

YES

>> GO TO 8.

NO

>> Refer to 

DLK-368, "ALL DOOR : Diagnosis Procedure"

.

8.

CHECK REMOTE KEYLESS ENTRY RECEIVER

Check remote keyless entry receiver.
Refer to 

DLK-265, "Component Function Check"

.

DLK-376

< SYMPTOM DIAGNOSIS >

DOOR DOES NOT LOCK/UNLOCK WITH INTELLIGENT KEY

Is the inspection result normal?

YES

>> GO TO 9.

NO

>> Repair or replace the malfunctioning parts.

9.

CHECK DOOR SWITCH

Check door switch.
Refer to 

DLK-241, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 10.

NO

>> Repair or replace the malfunctioning parts.

10.

REPLACE INTELLIGENT KEY

1.

Replace Intelligent Key.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Replace BCM. Refer to 

BCS-98, "Removal and Installation"

.

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

DLK-377

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

IGNITION POSITION WARNING FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009649341

1.

CHECK DTC WITH BCM

Check that DTC is not detected with BCM.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Refer to 

BCS-63, "DTC Index"

.

2.

CHECK POWER DOOR LOCK OPERATION

Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?

YES

>> GO TO 3.

NO

>> Refer to 

DLK-368, "ALL DOOR : Diagnosis Procedure"

.

3.

CHECK DOOR SWITCH

Check door switch
Refer to 

DLK-241, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK BACK DOOR SWITCH

Check door switch
Refer to 

DLK-243, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-98, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-42, "Intermittent Incident"

.

 

 

 

 

 

 

 

Content   ..  413  414  415  416   ..