Nissan Quest E52. Manual - part 254

 

  Index      Nissan     Nissan Quest E52 (2011-2014 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  252  253  254  255   ..

 

 

Nissan Quest E52. Manual - part 254

 

 

BRAKE WARNING LAMP

BRC-109

< DTC/CIRCUIT DIAGNOSIS >

[WITH VDC]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

BRAKE WARNING LAMP

Component Function Check

INFOID:0000000009651433

1.

CHECK BRAKE WARNING LAMP FUNCTION (1)

Check that brake warning lamp in combination meter turns ON for approx. 2 second after ignition switch is
turned ON.

CAUTION:

Never start engine.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Proceed to 

BRC-109, "Diagnosis Procedure"

.

2.

CHECK BRAKE WARNING LAMP FUNCTION (2)

Check that brake warning lamp in combination meter turns ON/OFF when parking brake is operated.
NOTE:
Brake warning lamp turns ON when parking brake is operated (when parking brake switch is ON).

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Check parking brake switch system. Refer to 

BRC-104, "Diagnosis Procedure"

.

3.

CHECK BRAKE WARNING LAMP FUNCTION (3)

Check that brake warning lamp in combination meter turns ON/OFF when brake fluid level switch is operated
while brake fluid level in reservoir tank is with the specified level.
NOTE:
Brake warning lamp turns ON when brake fluid is less than the specified level (when brake fluid level switch is
ON).

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Check brake fluid level switch system. Refer to 

BRC-89, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000009651434

1.

CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIR-

CUIT

Perform the trouble diagnosis for ABS actuator and electric unit (control unit) power supply and ground circuit.
Refer to 

BRC-101, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace error-detected parts.

2.

PERFORM THE SELF-DIAGNOSIS

With CONSULT

Perform self-diagnosis for “ABS”.

Is any DTC detected?

YES

>> Check the DTC. Refer to 

BRC-38, "DTC Index"

.

NO

>> GO TO 3.

3.

CHECK COMBINATION METER

Check combination meter. Refer to 

MWI-35, "CONSULT Function"

.

Is the inspection result normal?

YES

>> Replace ABS actuator and electric unit (control unit). Refer to 

BRC-123, "Removal and Installa-

tion"

.

NO

>> Repair or replace combination meter. Refer to 

MWI-93, "Removal and Installation"

.

BRC-110

< DTC/CIRCUIT DIAGNOSIS >

[WITH VDC]

VDC WARNING LAMP

VDC WARNING LAMP

Component Function Check

INFOID:0000000009651435

1.

CHECK VDC WARNING LAMP FUNCTION

Check that VDC warning lamp in combination meter turns ON for approx. 2 second after ignition switch is
turned ON.

CAUTION:

Never start engine.
Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Proceed to diagnosis procedure. Refer to 

BRC-110, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000009651436

1.

CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIR-

CUIT

Perform the trouble diagnosis for ABS actuator and electric unit (control unit) power supply and ground circuit.
Refer to 

BRC-101, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace error-detected parts.

2.

PERFORM THE SELF-DIAGNOSIS

With CONSULT

Perform self-diagnosis for “ABS”.
Is any DTC detected?

YES

>> Check the DTC. Refer to 

BRC-38, "DTC Index"

.

NO

>> GO TO 3.

3.

CHECK VDC WARNING LAMP SIGNAL

With CONSULT

1.

Select “ABS”, “DATA MONITOR” and “SLIP/VDC LAMP” according to this order.

2.

Turn the ignition switch OFF.

3.

Check that data monitor displays “On” for approx. 1 second after ignition switch is turned ON, and then
changes to “Off”.

CAUTION:

Never start engine.

Is the inspection result normal?

YES

>> Check combination meter. Refer to 

MWI-35, "CONSULT Function"

.

NO

>> Replace ABS actuator and electric unit (control unit). Refer to 

BRC-123, "Removal and Installa-

tion"

.

VDC OFF INDICATOR LAMP

BRC-111

< DTC/CIRCUIT DIAGNOSIS >

[WITH VDC]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

VDC OFF INDICATOR LAMP

Component Function Check

INFOID:0000000009651437

1.

CHECK VDC OFF INDICATOR LAMP FUNCTION (1)

Check that VDC OFF indicator lamp in combination meter turns ON for approx. 2 second after ignition switch
is turned ON.

CAUTION:

Never start engine.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Proceed to diagnosis procedure. Refer to 

BRC-111, "Diagnosis Procedure"

.

2.

CHECK VDC OFF INDICATOR LAMP FUNCTION (2)

Check that VDC OFF indicator lamp in combination meter turns ON/OFF when VDC OFF switch is operated.
Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Check VDC OFF switch system. Refer to 

BRC-106, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000009651438

1.

CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) POWER SUPPLY AND GROUND CIR-

CUIT

Perform the trouble diagnosis for ABS actuator and electric unit (control unit) power supply and ground circuit.
Refer to 

BRC-101, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace error-detected parts.

2.

CHECK VDC OFF INDICATOR LAMP SIGNAL (1)

With CONSULT

1.

Select “ABS”, “DATA MONITOR” and “OFF LAMP” according to this order.

2.

Turn the ignition switch OFF.

3.

Check that data monitor displays “On” for approx. 1 second after ignition switch is turned ON, and then
changes to “Off”.

CAUTION:

Never start engine.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace ABS actuator and electric unit (control unit). Refer to 

BRC-123, "Removal and Installa-

tion"

.

3.

CHECK VDC OFF INDICATOR LAMP SIGNAL (2)

With CONSULT

1.

Select “ABS”, “DATA MONITOR” and “OFF LAMP” according to this order.

2.

Check that data monitor displays “On” or “Off” each time when VDC OFF switch is operated.

Is the inspection result normal?

YES

>> Check combination meter. Refer to 

MWI-35, "CONSULT Function"

.

NO

>> Check VDC OFF switch system. Refer to 

BRC-106, "Diagnosis Procedure"

.

BRC-112

< SYMPTOM DIAGNOSIS >

[WITH VDC]

EXCESSIVE OPERATION FREQUENCY

SYMPTOM DIAGNOSIS

EXCESSIVE OPERATION FREQUENCY

Description

INFOID:0000000009651439

VDC function, TCS function, ABS function, EBD function and brake limited slip differential (BLSD) function
operates in excessive operation frequency.

Diagnosis Procedure

INFOID:0000000009651440

1.

CHECK BRAKING FORCE

Check brake force using a brake tester.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check brake system.

2.

CHECK FRONT AND REAR AXLE

Check that there is no excessive looseness in front and rear axle.
• Front axle: Refer to 

FAX-7, "Inspection"

.

• Rear axle: Refer to 

RAX-4, "Inspection"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace error-detected parts.

3.

CHECK WHEEL SENSOR

Check wheel sensor.
• Check installation and damage of wheel sensor.
• Check connection of wheel sensor harness connector.
• Check terminal of wheel sensor harness connector.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>>

Repair or replace wheel sensor.

• Front wheel sensor: Refer to 

BRC-119, "FRONT WHEEL SENSOR : Removal and Installation"

.

• Rear wheel sensor: Refer to 

BRC-120, "REAR WHEEL SENSOR : Removal and Installation"

.

4.

CHECK SENSOR ROTOR

Check that there is no looseness, damage or foreign material on sensor rotor.
Is the inspection result normal?

YES

>> GO TO 5.

NO

>>

Repair installation or replace sensor rotor.

• Front sensor rotor: Refer to 

BRC-122, "FRONT SENSOR ROTOR : Removal and Installation"

.

• Rear sensor rotor. Refer to 

BRC-122, "REAR SENSOR ROTOR : Removal and Installation"

.

5.

CHECK WARNING LAMP TURNS OFF

Check that ABS warning lamp, brake warning lamp and VDC warning lamp turn OFF approx. 2 second after
key switch is turned ON and stay in OFF status during driving.

CAUTION:

• Brake warning lamp turns ON when parking brake is operated (parking brake switch is ON) or brake

fluid is less than the specified level (brake fluid level switch is ON).

• VDC function and TCS function never operate when VDC OFF switch is operated (when VDC OFF

indicator lamp turns ON).

Is the inspection result normal?

YES

>> Normal

NO

>> Perform self-diagnosis for “ABS” with CONSULT.

 

 

 

 

 

 

 

Content   ..  252  253  254  255   ..