Nissan Quest E52. Manual - part 94

AV

SLIDE DOOR SPEAKER

AV-255

< REMOVAL AND INSTALLATION >

[BASE AUDIO WITH SEPARATE DISPLAY]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

SLIDE DOOR SPEAKER

Removal and Installation

INFOID:0000000009652090

REMOVAL

1.

Remove slide door finisher. Refer to 

INT-17, "Removal and Installation"

.

2.

Remove screws and disconnect connector, and remove slide door speaker.

INSTALLATION

Install in the reverse order of removal.

AV-256

< REMOVAL AND INSTALLATION >

[BASE AUDIO WITH SEPARATE DISPLAY]

MULTIFUNCTION SWITCH

MULTIFUNCTION SWITCH

Removal and Installation

INFOID:0000000009652091

REMOVAL

1.

Remove cluster lid C. Refer to 

IP-14, "Removal and Installation"

.

2.

Remove multifunction switch mounting screws.

3.

Remove bracket and disconnect harness connectors connected to preset switch.

4.

Unhook pawl to remove multifunction switch from cluster lid C.

CAUTION:

Carefully handle the pawl fixing the multifunction switch to prevent damage to the pawl.

INSTALLATION

Install in the reverse order of removal.

AV

PRESET SWITCH

AV-257

< REMOVAL AND INSTALLATION >

[BASE AUDIO WITH SEPARATE DISPLAY]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

PRESET SWITCH

Removal and Installation

INFOID:0000000009652092

REMOVAL

1.

Remove cluster lid C. Refer to 

IP-14, "Removal and Installation"

.

2.

Remove preset switch mounting screws and disconnect preset switch connector.

3.

Unhook pawl by using a remover tool to remove preset switch from cluster lid C.

CAUTION:

Carefully handle the pawl fixing the preset switch to prevent damage to the pawl.

INSTALLATION

Install in the reverse order of removal.

AV-258

< REMOVAL AND INSTALLATION >

[BASE AUDIO WITH SEPARATE DISPLAY]

DISK EJECT SWITCH

DISK EJECT SWITCH

Removal and Installation

INFOID:0000000009652093

REMOVAL

1.

Remove instrument lower center cover. Refer to 

IP-14, "Removal and Installation"

.

2.

Remove screws and unhook two pawls of AV control unit to remove disk eject switch.

CAUTION:

Carefully handle the pawl fixing the disk eject switch to prevent damage to the pawl.

INSTALLATION

Install in the reverse order of removal.