|
|
B1082 SEAT BELT PRE-TENSIONER RH SRC-49 < DTC/CIRCUIT DIAGNOSIS > C D E F G I J K L M A B SRC N O P 3. Check for DTC using CONSULT. YES >> GO TO 3. NO >> Refer to GI-41, "Intermittent Incident" . 3. WIRING HARNESS Check the wiring harness for visible damage. NOTE: The entire wiring harness should be inspected from the air bag diagnosis sensor unit to the end component (including any in-line connectors). YES >> GO TO 4. NO >> Replace the harness. 4. CONFIRM DTC 1. Reconnect all harness connectors. 2. Turn ignition switch ON. 3. Check for DTC using CONSULT. YES >> GO TO 5. NO >> Refer to GI-41, "Intermittent Incident" . 5. AIR BAG DIAGNOSIS SENSOR UNIT 1. Replace the air bag diagnosis sensor unit. Refer to SR-21, "Removal and Installation" 2. Turn ignition switch ON. 3. Check for DTC using CONSULT. YES >> GO TO 6. NO >> Clear DTC. Inspection End. 6. SEAT BELT PRE-TENSIONER RH 1. Replace the seat belt pre-tensioner RH. Refer to SR-23, "Removal and Installation" . 2. Turn ignition switch ON. 3. Check for DTC using CONSULT. YES >> GO TO 7. NO >> Clear DTC. Inspection End. 7. RELATED HARNESS Replace the related harness. >> END |