|
|
BR-44 < SERVICE DATA AND SPECIFICATIONS (SDS) SERVICE DATA AND SPECIFICATIONS (SDS) SERVICE DATA AND SPECIFICATIONS (SDS) SERVICE DATA AND SPECIFICATIONS (SDS) General Specifications INFOID:0000000009365031 Unit: mm (in) Brake Pedal INFOID:0000000009365032 Unit: mm (in) Check Valve INFOID:0000000009641742 Brake Booster INFOID:0000000009365033 Unit: mm (in) Front Disc Brake INFOID:0000000009365034 Unit: mm (in) Front brake Cylinder bore diameter 54.025 (2.13) Pad length × width × thickness 115.0 × 42.0 × 9.0 (4.53 × 1.654 × 0.354) Rotor outer diameter × thickness 260 × 22.0 (10.24 × 0.87) Rear brake Cylinder bore diameter 19.05 (3/4) Lining length × width × thickness Trailing: 172 × 37 × 4.8 (6.77 × 1.46 × 0.19) Leading: 155 × 37 × 4.8 (6.10 ×1.46 × 0.19) Drum inner diameter - new 203.2 (8.00) Master cylinder Cylinder bore diameter 22.23 (0.875) Control valve Valve type Electric brake force distribution Brake booster Diaphragm diameter 255 (10) Recommended brake fluid Refer to MA-12, "Fluids and Lubricants" Item Standard Brake pedal height 158 ±5 (6.22 ±0.20) Clearance between brake pedal lever and the stop lamp switch threaded end 0.2 – 1.96 (0.008 – 0.077) Brake pedal full stroke 128 (5.04) Vacuum applied at intake manifold side. 0 kPa (0 mmHg, 0 inHg) Vacuum leakage Within 1.3 kPa (10 mmHg, 0.39 inHg) of vacuum for 15 seconds. Item Standard Input rod length 125 (4.92) Item Limit Brake pad Wear thickness 2.0 (0.08) Disc rotor Wear thickness 20.0 (0.787) Thickness variation (measured at 8 positions) 0.013 (0.001) Runout (with it attached to the vehicle) 0.055 (0.002) |