|
|
BCS-44 < ECU DIAGNOSIS INFORMATION > BCM Fail-safe INFOID:0000000009567537 BCM performs fail-safe control when the following DTCs are detected. 90 (W) Ground Push-button ignition Output Push-button ig- ON Battery voltage OFF 0 – 1.5 V 91 (V) Ground ACC/ON indicator Output Push-button ig- OFF Battery voltage ACC or ON 0 – 1.5 V 93 (R) Ground Intelligent Key warn- Output Intelligent Key Sounding 0 – 1.5 V Not sounding Battery voltage 96 (SB) Ground Accessory relay Output Ignition Push- OFF 0 – 0.5 V ACC or ON Battery voltage 97 (R/Y) Ground Starter relay control Output Push-button ig- Selector lever in P (Park) Battery voltage Selector lever not in P 0 – 0.5 V 98 (O) Ground Ignition relay (IPDM Output Push-button ig- OFF or ACC Battery voltage ON 0 – 0.5 V 99 (GR) Ground Ignition relay (F/B) Output Push-button ig- OFF or ACC 0 – 0.5 V ON Battery voltage 100 (L) Ground Request sw (AS) Input Passenger door ON (Pressed) 0 – 1.5 V OFF (Not pressed) Battery voltage 101 (V) Ground Clutch interlock Input Clutch interlock OFF (clutch pedal is not 0V ON (clutch pedal is de- Battery voltage 102 (BR) Ground P/N position Input Selector lever Selector lever in P (Park) Battery voltage Selector lever not in P 0 – 1.5 V 104 (V) Ground CVT shift selector Output Push-button ignition switch ON 9 – 16 V 105 (SB) Ground Stop lamp switch 2 Input Push-button ignition switch OFF Battery voltage 106 (Y) Ground Blower relay control Output Push-button ig- OFF or ACC 0 – 0.5 V ON Battery voltage Terminal No. (Wire color) Description Condition Value (Approx.) Signal name Input/ Output + − CONSULT Display Fail-safe Cancellation B2192: ID DISCORD BCM-ECM Inhibit engine cranking Erase DTC B2193: CHAIN OF BCM-ECM Inhibit engine cranking Erase DTC B2195: ANTI SCANNING Inhibit engine cranking Ignition switch ON → OFF B2198: NATS ANTENNA AMP Inhibit engine cranking Erase DTC |