|
|
EC-100 < ECU DIAGNOSIS INFORMATION > [QR25DE] ECM *1: 1st trip DTC No. is the same as DTC No. *5: The troubleshooting for this DTC needs CONSULT. EC-66, "On Board Diagnosis Function" *7: SRT code will not be set if the self-diagnostic result is NG. Test Value and Test Limit INFOID:0000000011518225 The following is the information specified in Service $06 of SAE J1979/ISO 15031-5. The test value is a parameter used to determine whether a system/circuit diagnostic test is OK or NG while being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the maximum or minimum value and is compared with the test value being monitored. These data (test value and test limit) are specified by On Board Monitor ID (OBDMID), Test ID (TID), Unit and Scaling ID and can be displayed on the GST screen. The items of the test value and test limit will be displayed with GST screen which items are provided by the ECM. (e.g., if bank 2 is not applied on this vehicle, only the items of bank 1 are displayed) P2119 2119 ETC ACTR-B1 — 1 × B P2122 2122 APP SEN 1/CIRC — 1 × B P2123 2123 APP SEN 1/CIRC — 1 × B P2127 2127 APP SEN 2/CIRC — 1 × B P2128 2128 APP SEN 2/CIRC — 1 × B P2135 2135 TP SENSOR-B1 — 1 × B P2138 2138 APP SENSOR — 1 × B P2610 2610 ECM/PCM INTERNAL ENG OFF TIMER — 2 × A and B DTC *1 Items (CONSULT screen terms) SRT code Trip MIL Permanent DTC group *4 Reference page CONSULT GST *2 ECM *3 |