|
|
REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT DEF-29 < DTC/CIRCUIT DIAGNOSIS > C D E F G H I J K M A B DEF N O P Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 5. 4. CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect rear window defogger. 3. Check continuity between rear window defogger connector and ground. Is the inspection result normal? YES >> GO TO 6. NO >> Repair or replace harness. 5. CHECK HARNESS CONTINUITY 1. Turn ignition switch OFF. 2. Disconnect fuse block (J/B). 3. Check continuity between fuse block (J/B) connector and rear window defogger condenser connector. Is the inspection result normal? YES >> Replace rear window defogger condenser. Refer to DEF-43, "Removal and Installation" NO >> Replace or repair harness. 6. CHECK FILAMENT Check filament. DEF-29, "Component Inspection" . Is the inspection result normal? YES >> Refer to GI-44, "Intermittent Incident" . NO >> Repair filament. Refer to DEF-41, "Inspection and Repair" . Component Inspection INFOID:0000000011277740 1. CHECK FILAMENT Check the filament for damage or open circuits. DEF-41, "Inspection and Repair" Is the inspection result normal? YES >> Inspection End. NO >> Repair filament. Refer to DEF-41, "Inspection and Repair" . (+) (–) Condition Voltage (V) (Approx.) Rear window defogger Connector Terminal D510 1 Ground Rear window defogger switch ON Battery voltage OFF 0 Rear window defogger Ground Continuity Connector Terminal D525 2 Yes Fuse block (J/B) Rear window defogger condenser Continuity Connector Terminal Connector Terminal B29 3T B6 1 Yes 5T |