|
|
Content .. 1128 1129 1130 1131 ..
SRC-70 < DTC/CIRCUIT DIAGNOSIS > B0093 FRONT DOOR SATELLITE SENSOR LH Is the inspection result normal? YES >> GO TO 2. NO >> Perform one of the following repairs: • Visible damage: Replace the harness. • Loose terminal: Secure the terminal. • Poor connection: Secure the connection. 2. CONFIRM DTC 1. Reconnect all harness connectors. 2. Turn ignition switch ON. 3. Check for DTC using CONSULT. YES >> GO TO 3. NO >> Refer to GI-44, "Intermittent Incident" . 3. WIRING HARNESS Check the wiring harness for visible damage. NOTE: The entire wiring harness should be inspected from the air bag diagnosis sensor unit to the end component (including any in-line connectors). YES >> GO TO 4. NO >> Replace the harness. 4. CONFIRM DTC 1. Reconnect all harness connectors. 2. Turn ignition switch ON. 3. Check for DTC using CONSULT. YES >> GO TO 5. NO >> Refer to GI-44, "Intermittent Incident" . 5. FRONT DOOR SATELLITE SENSOR LH 1. Replace the front door satellite sensor LH. Refer to SR-24, "Removal and Installation" 2. Turn ignition switch ON. 3. Check for DTC using CONSULT. YES >> GO TO 6. NO >> Clear DTC. Inspection End. 6. AIR BAG DIAGNOSIS SENSOR UNIT 1. Replace the air bag diagnosis sensor unit. Refer to SR-26, "Removal and Installation" . 2. Turn ignition switch ON. 3. Check for DTC using CONSULT. YES >> GO TO 7. NO >> Clear DTC. Inspection End. 7. RELATED HARNESS Replace the related harness. >> END |