|
|
EXL-26 < SYSTEM DESCRIPTION > [XENON TYPE] DIAGNOSIS SYSTEM (BCM) HEADLAMP : CONSULT Function (BCM - HEAD LAMP) INFOID:0000000010069549 DATA MONITOR ACTIVE TEST WORK SUPPORT Monitor Item [Unit] Description PUSH SW [On/Off] Indicates condition of push button ignition switch ENGINE STATE [Stop/Stall/Crank/Run] Indicates engine status received from ECM on CAN communication line VEH SPEED 1 [km/h] Indicates vehicle speed signal received from ABS on CAN communication line KEY SW -SLOT [On/Off] Indicates condition of key slot TURN SIGNAL R [On/Off] Indicates condition of combination switch TURN SIGNAL L [On/Off] TAIL LAMP SW [On/Off] HI BEAM SW [On/Off] HEAD LAMP SW 1 [On/Off] HEAD LAMP SW 2 [On/Off] PASSING SW [On/Off] AUTO LIGHT SW [On/Off] FR FOG SW [On/Off] DOOR SW-DR [On/Off] Indicates condition of front door switch LH DOOR SW-AS [On/Off] Indicates condition of front door switch RH DOOR SW-RR [On/Off] Indicates condition of rear door switch RH DOOR SW-RL [On/Off] Indicates condition of rear door switch LH DOOR SW-BK [On/Off] Indicates condition of trunk switch OPTICAL SENSOR [V] Indicates voltage signal from optical sensor Test Item Description TAIL LAMP This test is able to check tail lamp operation [On/Off]. HEAD LAMP This test is able to check head lamp operation [Hi/Low/Off]. FR FOG LAMP This test is able to check front fog lamp operation [On/Off]. DAYTIME RUNNING LIGHT This test is able to check daytime running light operation [LH/RH/Off]. ILL DIM SIGNAL This test is able to check head lamp illumination dimming operation [On/Off]. Support Item Setting Description CUSTOM A/LIGHT SETTING MODE 4 Less sensitive setting than normal setting (Turns ON later than MODE 3 More sensitive setting than MODE 2 (Turns ON earlier than MODE MODE 2 More sensitive setting than normal setting (Turns ON earlier than MODE 1* Normal BATTERY SAVER SET On* Exterior lamp battery saver function ON Off Exterior lamp battery saver function OFF |