Nissan Altima HL32 Hybrid. Manual - part 930

FRONT POWER WINDOW SWITCH

PWC-161

< ECU DIAGNOSIS >

[LH&RH FRONT WINDOW ANTI-PINCH]

C

D

E

F

G

H

I

J

L

M

A

B

PWC

N

O

P

Fail Safe

INFOID:0000000004215942

FAIL-SAFE CONTROL

Switches to fail-safe control when malfunction is detected in encoder signal that detects up/down speed and

direction of door glass. Switches to fail-safe control when error beyond regulation value is detected between

the fully closed position and the actual position of the glass.

ABKIA0749GB

PWC-162

< ECU DIAGNOSIS >

[LH&RH FRONT WINDOW ANTI-PINCH]

FRONT POWER WINDOW SWITCH

It changes to condition before initialization and the following functions do not operate when switched to fail-

safe control.

• Auto-up operation

• Anti-pinch function

• Retained power function

Perform initial operation to recover when switched to fail-safe mode. However, it switches back to fail-safe

control when malfunction is found in power window switch or in motor.

Error

Error condition

Pulse sensor malfunction

When only one side of pulse signal is being detected for more than the specified value.

Both pulse sensors mal-
function

When both pulse signals have not been detected for more than the specified value during glass open/
close operation.

Pulse direction malfunction

When the pulse signal that is detected during glass open/close operation detects the opposite condition 
of power window motor operating direction.

Glass recognition position 
malfunction 1

When it detects the error between glass fully closed position in power window switch memory and actual 
fully closed position during glass open/close operation is more than the specified value.

Glass recognition position 
malfunction 2

When it detects pulse count more than the value of glass full stroke during glass open/close operation.

Malfunction of not yet up-
dated closed position of 
glass

When glass open/close operation is continuously performed without fully closing more than the specified 
value (approximately 10 strokes).

BCM (BODY CONTROL MODULE)

PWC-163

< ECU DIAGNOSIS >

[LH&RH FRONT WINDOW ANTI-PINCH]

C

D

E

F

G

H

I

J

L

M

A

B

PWC

N

O

P

BCM (BODY CONTROL MODULE)

Reference Value

INFOID:0000000004490988

VALUES ON THE DIAGNOSIS TOOL

Monitor Item

Condition

Value/Status

FR WIPER HI

Other than front wiper switch HI

OFF

Front wiper switch HI

ON

FR WIPER LOW

Other than front wiper switch LO

OFF

Front wiper switch LO

ON

FR WASHER SW

Front washer switch OFF

OFF

Front washer switch ON

ON

FR WIPER INT

Other than front wiper switch INT

OFF

Front wiper switch INT

ON

FR WIPER STOP

Front wiper is not in STOP position

OFF

Front wiper is in STOP position

ON

INT VOLUME

Wiper intermittent dial is in a dial position 1 - 7

Wiper intermittent dial position

TURN SIGNAL R

Other than turn signal switch RH

OFF

Turn signal switch RH

ON

TURN SIGNAL L

Other than turn signal switch LH

OFF

Turn signal switch LH

ON

TAIL LAMP SW

Other than lighting switch 1ST and 2ND

OFF

Lighting switch 1ST or 2ND

ON

HI BEAM SW

Other than lighting switch HI

OFF

Lighting switch HI

ON

HEAD LAMP SW 1

Other than lighting switch 2ND

OFF

Lighting switch 2ND

ON

HEAD LAMP SW 2

Other than lighting switch 2ND

OFF

Lighting switch 2ND

ON

PASSING SW

Other than lighting switch PASS

OFF

Lighting switch PASS

ON

AUTO LIGHT SW

Other than lighting switch AUTO

OFF

Lighting switch AUTO

ON

FR FOG SW

Front fog lamp switch OFF

OFF

Front fog lamp switch ON

ON

DOOR SW-DR

Front door LH closed

OFF

Front door LH opened

ON

DOOR SW-AS

Front door RH closed

OFF

Front door RH opened

ON

DOOR SW-RR

Rear door RH closed

OFF

Rear door RH opened

ON

DOOR SW-RL

Rear door LH closed

OFF

Rear door LH opened

ON

DOOR SW-BK

NOTE:
This item is displayed, but cannot be monitored. 

OFF

PWC-164

< ECU DIAGNOSIS >

[LH&RH FRONT WINDOW ANTI-PINCH]

BCM (BODY CONTROL MODULE)

CDL LOCK SW

Other than power door lock switch LOCK

OFF

Door lock/unlock switch LOCK

ON

CDL UNLOCK SW

Other than door lock/unlock switch UNLOCK

OFF

Door lock/unlock switch UNLOCK

ON

KEY CYL LK-SW

Other than front door LH key cylinder LOCK position

OFF

Front door LH key cylinder LOCK position

ON

KEY CYL UN-SW

Other than front door LH key cylinder UNLOCK position

OFF

Front door LH key cylinder UNLOCK position

ON

KEY CYL SW-TR

NOTE:
This item is displayed, but cannot be monitored. 

OFF

HAZARD SW

When hazard switch is not pressed

OFF

When hazard switch is pressed

ON

REAR DEF SW

When rear window defogger switch is pressed

ON

FAN ON SIG

When AUTO switch or fan switch is pressed

ON

AIR COND SW

When A/C switch is pressed

ON

TR CANCEL SW

Trunk lid opener cancel switch OFF

OFF

Trunk lid opener cancel switch ON

ON

TR/BD OPEN SW

Trunk lid opener switch OFF

OFF

While the trunk lid opener switch is turned ON

ON

TRNK/HAT MNTR

Trunk lid closed

OFF

Trunk lid opened

ON

RKE-LOCK

When LOCK button of Intelligent Key is not pressed

OFF

When LOCK button of Intelligent Key is pressed

ON

RKE-UNLOCK

When UNLOCK button of Intelligent Key is not pressed

OFF

When UNLOCK button of Intelligent Key is pressed

ON

RKE-TR/BD

When TRUNK OPEN button of Intelligent Key is not pressed

OFF

When TRUNK OPEN button of Intelligent Key is pressed

ON

RKE-PANIC

When PANIC button of Intelligent Key is not pressed

OFF

When PANIC button of Intelligent Key is pressed

ON

RKE-P/W OPEN

When UNLOCK button of Intelligent Key is not pressed and held

OFF

When UNLOCK button of Intelligent Key is pressed and held 

ON

RKE-MODE CHG

When LOCK/UNLOCK button of Intelligent Key is not pressed and 
held simultaneously

OFF

When LOCK/UNLOCK button of Intelligent Key is pressed and held 
simultaneously

ON

OPTICAL SENSOR

When outside of the vehicle is bright

Close to 5 V

When outside of the vehicle is dark

Close to 0 V

REQ SW-DR

When front door LH request switch is not pressed

OFF

When front door LH request switch is pressed

ON

REQ SW-AS

When front door RH request switch is not pressed

OFF

When front door RH request switch is pressed

ON

REQ SW-BD/TR

When trunk request switch is not pressed

OFF

When trunk request switch is pressed

ON

PUSH SW

When push-button ignition switch is not pressed

OFF

When push-button ignition switch is pressed

ON

Monitor Item

Condition

Value/Status