|
|
P0AFA-123 HBB-73 < COMPONENT DIAGNOSIS > D E F G H I J K L M A B HBB N O P 3. CHECK CONNECTOR CONNECTION CONDITION (BATTERY SMART UNIT) CAUTION: Be sure to wear insulated gloves. 1. Turn ignition switch OFF. 2. Remove the service plug grip (Refer to GI-24, "Precautions For High-Voltage System" 3. Remove the HV relay assembly (Refer to HBB-105, "Removal and Installation" 4. Check the battery smart unit harness connectors connection. OK or NG OK >> GO TO 4. NG >> Connect securely. 4. REPLACE BATTERY SMART UNIT HBB-101, "Removal and Installation" >> GO TO 5. 5. CLEAR DTC 1. Turn ignition switch ON. 2. Clear DTC. >> GO TO 6. 6. RECONFIRM DTC OUTPUT 1. Check DTC. YES >> Replace HV battery. (Refer to HBB-97, "Removal and Installation" NO >> Completed. The connectors are connected securely and there are no contact problems. |