Nissan Altima HL32 Hybrid. Manual - part 81

 

  Index      Nissan     Nissan Altima HL32 Hybrid (2009 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  79  80  81  82   ..

 

 

Nissan Altima HL32 Hybrid. Manual - part 81

 

 

BCS-22

< FUNCTION DIAGNOSIS >

[BCM]

DIAGNOSIS SYSTEM (BCM)

ACTIVE TEST

HEADLAMP
HEADLAMP : CONSULT-III Function (BCM - HEAD LAMP)

INFOID:0000000004218964

WORK SUPPORT

DOOR SW-DR
[ON/OFF]

The switch status input from front door switch LH

DOOR SW-AS
[ON/OFF]

The switch status input from front door switch RH

DOOR SW-RR
[ON/OFF]

The switch status input from rear door switch RH

DOOR SW- RL
[ON/OFF]

The switch status input from rear door switch LH

DOOR SW-BK
[ON/OFF]

NOTE:
The item is indicated, not monitored.

CDL LOCK SW
[ON/OFF]

Lock switch status received from door lock/unlock switch by power window serial link

CDL UNLOCK SW
[ON/OFF]

Unlock switch status received from door lock/unlock switch by power window serial 
link

KEY CYL LK-SW
[ON/OFF]

Lock switch status received from key cylinder switch by power window serial link

KEY CYL UN-SW
[ON/OFF]

Unlock switch status received from key cylinder switch by power window serial link

TRNK/HAT MNTR
[ON/OFF]

The switch status input from trunk room lamp switch

RKE-LOCK
[ON/OFF]

Lock signal status received from remote keyless entry receiver

RKE-UNLOCK
[ON/OFF]

Unlock signal status received from remote keyless entry receiver

Monitor item

[Unit]

Description

Test item

Operation

Description

INT LAMP

ON

Outputs the interior room lamp control signal to turn map lamp and personal lamp ON 
(Map lamp switch is in DOOR position).

OFF

Stops the interior room lamp control signal to turn map lamp and personal lamp OFF.

STEP LAMP TEST

ON

Outputs the step lamp control signal to turn step lamp ON.

OFF

Stops the step lamp control signal to turn step lamp OFF.

LUGGAGE LAMP TEST

ON

Outputs the luggage room lamp control signal to turn step lamp ON.

OFF

Stops the luggage room lamp control signal to turn step lamp ON.

Work item

Setting item

Setting

BATTERY SAVER SET

ON

1

With the exterior lamp battery saver function

OFF

Without the exterior lamp battery saver function

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-23

< FUNCTION DIAGNOSIS >

[BCM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

1 : Initial setting
2 : With auto light system

DATA MONITOR

ILL DELAY SET

2

MODE 1

1

45 sec.

Sets delay timer function timer operation time
(All doors closed)

MODE 2

Without the func-
tion

MODE 3

30 sec.

MODE 4

60 sec.

MODE 5

90 sec.

MODE 6

120 sec.

MODE 7

150 sec.

MODE 8

180 sec.

CUSTOM A/LIGHT 
SETTING

2

MODE 1

1

Normal

MODE 2

More sensitive setting than normal setting (Turns ON earlier than normal operation.)

MODE 3

More sensitive setting than MODE 2 (Turns ON earlier than MODE 2.)

MODE 4

Less sensitive setting than normal setting (Turns ON later than normal operation.)

Work item

Setting item

Setting

Monitor item

[Unit]

Description

PUSH SW
[ON/OFF]

The switch status input from push-button ignition switch

ENGINE STATE
[STOP/STALL/CRANK/RUN]

The engine status received from ECM with CAN communication

VEH SPEED 1
[km/h]

The value of the vehicle speed received from combination meter with CAN commu-
nication

KEY SW-SLOT
[ON/OFF]

Key switch status input from key slot

TURN SIGNAL R
[ON/OFF]

Each switch status that BCM judges from the combination switch reading function

TURN SIGNAL L
[ON/OFF]

TAIL LAMP SW
[ON/OFF]

HI BEAM SW
[ON/OFF]

HEAD LAMP SW1
[ON/OFF]

HEAD LAMP SW2
[ON/OFF]

PASSING SW
[ON/OFF]

AUTO LIGHT SW
[ON/OFF]

FR FOG SW
[ON/OFF]

DOOR SW-DR
[ON/OFF]

The switch status input from front door switch LH

DOOR SW-AS
[ON/OFF]

The switch status input from front door switch RH

BCS-24

< FUNCTION DIAGNOSIS >

[BCM]

DIAGNOSIS SYSTEM (BCM)

1: The item is indicated, not monitored
2: With auto light system

ACTIVE TEST

1: With daytime running light system.
2: The item is indicated, not monitored.

WIPER
WIPER : CONSULT - III Function (BCM - WIPER)

INFOID:0000000004218965

WORK SUPPORT

* : Factory setting

DATA MONITOR

DOOR SW-RR
[ON/OFF]

The switch status input from rear door switch RH

DOOR SW- RL
[ON/OFF]

The switch status input from rear door switch LH

DOOR SW-BK

1

[ON/OFF]

OPTICAL (LIGHT) SENSOR
[V]

2

The value of exterior brightness voltage input from the optical sensor 

Monitor item

[Unit]

Description

Test item

Operation

Description

TAIL LAMP

ON

Transmits the position light request signal to IPDM E/R with CAN com-
munication to turn the tail lamp ON.

OFF

Stops the tail lamp request signal transmission.

HEAD LAMP

HI

Transmits the high beam request signal with CAN communication to turn 
the headlamp (HI)

LO

Transmits the low beam request signal with CAN communication to turn 
the headlamp (LO).

OFF

Stops the high & low beam request signal transmission.

FR FOG LAMP

ON

Transmits the front fog lamp light request signal to IPDM E/R with CAN 
communication to turn the front fog lamp ON.

OFF

Stops the front fog lamp request signal transmission.

DAYTIME RUNNING LIGHT

1

ON

Transmits the daytime running light system request signal to IPDM E/R

OFF

Stops the daytime running light request signal transmission

CORNERING LAMP

2

RH

LH

OFF

ILL DIM SIGNAL

2

ON

OFF

RR FOG LAMP

2

ON

OFF

Work item

Setting item

Description

WIPER SPEED SET-
TING

ON

With vehicle speed
(Front wiper intermittent time linked with the vehicle speed and wiper dial position)

OFF*

Without vehicle speed
(Front wiper intermittent time linked with the wiper dial position)

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-25

< FUNCTION DIAGNOSIS >

[BCM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

ACTIVE TEST

FLASHER
FLASHER : CONSULT-III Function (BCM - FLASHER)

INFOID:0000000004218966

WORK SUPPORT

* : Initial setting

DATA MONITOR

Monitor Item

[Unit]

Description

PUSH SW
[ON/OFF]

Displays the status of the push-button ignition switch judged by BCM.

VEH SPEED 1
[km/h]

Displays the value of the vehicle speed signal received from combination meter with 
CAN communication.

FR WIPER HI
[OFF/ON]

Status of each switch judged by BCM using the combination switch reading function

FR WIPER LOW
[OFF/ON]

FR WASHER SW
[OFF/ON]

FR WIPER INT
[OFF/ON]

FR WIPER STOP
[OFF/ON]

Displays the status of the front wiper auto stop signal received from IPDM E/R with 
CAN communication.

INT VOLUME
[1 

− 7] 

Status of each switch judged by BCM using the combination switch reading function

Test item

Operation

Description

FRONT WIPER

HI

Transmits the front wiper request signal (HI) to IPDM E/R with CAN communication to op-
erate the front wiper HI operation.

LO

Transmits the front wiper request signal (LO) to IPDM E/R with CAN communication to 
operate the front wiper LO operation.

INT

Transmits the front wiper request signal (INT) to IPDM E/R with CAN communication to 
operate the front wiper INT operation.

OFF

Stops transmitting the front wiper request signal to stop the front wiper operation.

Service item

Setting item

Setting

HAZARD ANSWER 
BACK

LOCK ONLY*

Activated when locking.

Sets the hazard warning lamp answer back activation 
when the door is lock/unlock with the request switch or 
the key fob.

UNLK ONLY

Activated when unlock-
ing.

LOCK/UNLK

Activated when locking/
unlocking

OFF

Not activated

Monitor item

[Unit]

Description

TURN SIGNAL R 
[ON/OFF]

Each switch condition that BCM judges from the combination switch reading function

TURN SIGNAL L 
[ON/OFF]

HAZARD SW
[ON/OFF]

The switch status input from the hazard warning switch

 

 

 

 

 

 

 

Content   ..  79  80  81  82   ..