|
|
P0605 ECM EC-1251 < DTC/CIRCUIT DIAGNOSIS > [VQ40DE FOR MEXICO] C D E F G H I J K L M A EC N P O P0605 ECM DTC Logic INFOID:0000000010471256 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PRECONDITIONING 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition switch ON. 3. Turn ignition switch OFF and wait at least 10 seconds. TESTING CONDITION: Before performing the following procedure, confirm that battery voltage is 11 V or more with ignition switch ON. >> GO TO 2. 2. PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON (engine stopped) and wait least 20 minutes. CAUTION: Never start engine during this procedure. 2. Turn ignition switch OFF and wait at least 10 seconds. 3. Turn ignition switch ON. 4. Check 1st trip DTC. YES >> Proceed to EC-1251, "Diagnosis Procedure" . NO >> INSPECTION END Diagnosis Procedure INFOID:0000000010471257 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Erase DTC. 3. Perform DTC confirmation procedure. Refer to . Is the 1st trip DTC P0605 displayed again? YES >> Replace ECM. Refer to EC-1072, "Additional Service When Replacing ECM" . NO >> INSPECTION END DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P0605 ECM Malfunction in the internal ROM of ECM. ECM |