|
|
CONSULT CHECKING SYSTEM GI-47 < BASIC INSPECTION > C D E F G H I J K L M B GI N O P CONSULT CHECKING SYSTEM Description INFOID:0000000009759216 NOTE: This vehicle is diagnosed using the CONSULT-III plus. equipped on the vehicle side, it will communicate with the control unit equipped in the vehicle and then enable various kinds of diag- nostic tests. • Refer to “CONSULT-III plus Operation Manual” for more informa- tion. Function and System Application INFOID:0000000009759217 x : Applicable CONSULT Data Link Connector (DLC) Circuit INFOID:0000000009759218 INSPECTION PROCEDURE If the CONSULT cannot diagnose the system properly, check the following items. : Instrument lower panel LH JSAIA2377ZZ Direct Diagnostic Mode Description ABS IPDM E/R MUL T I A V 1 BC M TRANSMISSION 2 AIR B A G MET E R/M & A ENGINE EPS HV AC 3 OCCUP ANT DETECTION ECU Identification The ECU part number is displayed. x x x x x x - x x x - Self Diagnostic Result The ECU self diagnostic results are displayed. x x x x x x x x x x - Data Monitor The ECU input/output data is displayed in real time. x x x x x x x x x x - Active Test The ECU activates outputs to test components. x x - x x - - x - x - Work support The settings for ECU functions can be changed. x - - x x - x x - x x DTC Work Support The status of system monitoring tests and the self diagnosis sta- - - - - - - - x - - - Configuration • The vehicle specification can be read and saved. - - x - - - - - - - - TROUBLE DIAG Self diagnostic history and trouble diagnosis records in ECU are - - - - - x - - - - - Warning History Displays the history of the combination meter warning lamp in- - - - - - - x - - - - CALIB DATA The calibration values of the ECU are displayed. - - - - x - - - - - - CAN Diag Support The result of transmit/receive diagnosis of CAN communication x x x x x x x x x x - |