|
|
AV-360 < DTC/CIRCUIT DIAGNOSIS > [NAVIGATION WITH BOSE] U1264 ANTENNA AMP. U1264 ANTENNA AMP. DTC Logic INFOID:0000000009759035 DTC DETECTION LOGIC Diagnosis Procedure INFOID:0000000009759036 Regarding Wiring Diagram information, refer to . 1. ANTENNA AMP. INSPECTION Visually inspect the antenna amp. and antenna feeder. Refer to . Is inspection result normal? YES >> GO TO 2. NO >> Repair or replace malfunctioning components. 2. CHECK CONTINUITY BETWEEN AV CONTROL UNIT AND ANTENNA AMP. 1. Turn ignition switch OFF. 2. Disconnect AV control unit connector M145 and antenna amp. connector M502. 3. Check continuity between AV control unit connector M145 and antenna amp. connector M502. 4. Check continuity between AV control unit connector M145 and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness or connectors. 3. CHECK AV CONTROL UNIT VOLTAGE 1. Connect AV control unit connector M145. 2. Turn ignition switch ON. 3. Check voltage between AV control unit connector M145 and ground. Is the inspection result normal? YES >> Replace antenna amp. Refer to AV-419, "Removal and Installation" NO >> Replace AV control unit. Refer to AV-406, "Removal and Installation" . CONSULT Display DTC Detection Condition Possible Cause ANTENNA AMP TERMINAL Open or short to ground is detected in Antenna • Antenna amp. disconnection. signal circuit. AV control unit Antenna amp. Continuity Connector Terminal Connector Terminal M145 54 M502 1 Yes AV control unit Ground Continuity Connector Terminal M145 54 — No AV control unit Ground Voltage (Approx.) (+) (–) Connector Terminal M145 54 — Battery voltage |