|
|
LAN-146 < DTC/CIRCUIT DIAGNOSIS > [CAN SYSTEM (TYPE 3)] MAIN LINE BETWEEN DLC AND VSP CIRCUIT MAIN LINE BETWEEN DLC AND VSP CIRCUIT Diagnosis Procedure INFOID:0000000010415404 1. CHECK HARNESS CONTINUITY (OPEN CIRCUIT) 1. Turn the power switch OFF. 2. Disconnect the 12V battery cable from the negative terminal. Refer to LAN-26, "Precautions for Removing 3. Disconnect the following harness connectors. - VCM - Approaching vehicle sound for pedestrians (VSP) control unit 4. Check the continuity between the data link connector harness connector and the approaching vehicle sound for pedestrians (VSP) control unit harness connector. Is the inspection result normal? YES (Present error)>>Check CAN system type decision again. YES (Past error)>>Error was detected in the main line between the data link connector and the approaching vehicle sound for pedestrians (VSP) control unit harness connector. NO >> Repair the main line between the data link connector and the approaching vehicle sound for pedestrians (VSP) control unit harness connector. Data link connector Approaching vehicle sound for pedestrians (VSP) control unit harness connector Continuity Connector No. Terminal No. Connector No. Terminal No. M4 6 M47 4 Existed 14 12 Existed |