|
|
TAIL LAMP CIRCUIT EXL-101 < DTC/CIRCUIT DIAGNOSIS > [LED HEADLAMP] C D E F G H I J K M A B EXL N O P TAIL LAMP CIRCUIT Component Function Check INFOID:0000000010121357 1. CHECK TAIL LAMP OPERATION CONSULT ACTIVE TEST 1. Select “EXTERNAL LAMPS” in “Active Test” of “IPDM E/R”. 2. While operating the test items, check that the tail lamp is turned ON. Is the inspection result normal? YES >> Tail lamp circuit is normal. NO >> Refer to EXL-101, "Diagnosis Procedure" . Diagnosis Procedure INFOID:0000000010121358 Regarding Wiring Diagram information. Refer to 1. CHECK PARKING LAMP OPERATION Check that the parking lamp is turned ON. YES-1 [When tail lamp (LH) does not turn ON.]>>GO TO 5. YES-2 [When tail lamp (RH) does not turn ON.]>>GO TO 2. NO >> Check parking lamp circuit. Refer to EXL-97, "Component Function Check" 2. CHECK TAIL LAMP (LH) FUSE 1. Turn power switch OFF. 2. Check that the following fuse is not blown: Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 4. 3. CHECK TAIL LAMP (RH) OUTPUT VOLTAGE CONSULT ACTIVE TEST 1. Disconnect rear combination lamp (RH) connector. 2. Turn power switch ON. 3. Select “EXTERNAL LAMPS” in “Active Test” of “IPDM E/R”. 4. While operating the test items, check voltage between IPDM E/R harness connector and ground. Is the inspection result normal? YES >> GO TO 5. NO >> Replace IPDM E/R. Refer to PCS-29, "Removal and Installation" . TAIL : Tail Lamp ON Off : Tail lamp OFF Unit Location Fuse No. Capacity Tail lamp (RH) IPDM E/R 46 10 A (+) ( −) Test item Voltage (Approx.) IPDM E/R Connector Terminal E14 38 Ground EXTERNAL LAMPS TAIL Battery voltage Off 0 V |