|
|
HAZARD AND BUZZER REMINDER DOES NOT OPERATE DLK-139 < SYMPTOM DIAGNOSIS > C D E F G H I J L M A B DLK N O P HAZARD AND BUZZER REMINDER DOES NOT OPERATE Diagnosis Procedure INFOID:0000000010119836 1. CHECK DTC WITH BCM AND COMBINATION METER Check that DTC is not detected with BCM and combination meter. YES >> GO TO 2. NO-1 >> Refer to NO-2 >> Refer to . (Combination meter) 2. CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT” 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT. 2. Select “HAZARD ANSWER BACK” in “Work support”. 3. Check the “HAZARD ANSWER BACK” in “Work support”. BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)" . Is the inspection result normal? YES >> GO TO 3. NO >> Set “HAZARD ANSWER BACK” in “Work support”. 3. CHECK “ANS BACK I-KEY LOCK” SETTING IN “WORK SUPPORT” 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT. 2. Select “ANS BACK I-KEY LOCK” in “Work support”. 3. Check the “ANS BACK I-KEY LOCK” in “Work support”. BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)" . Is the inspection result normal? YES >> GO TO 4. NO >> Set “ANS BACK I-KEY LOCK” in “Work support”. 4. CHECK “ANS BACK I-KEY UNLOCK” SETTING IN “WORK SUPPORT” 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT. 2. Select “ANS BACK I-KEY UNLOCK” in “Work support”. 3. Check the “ANS BACK I-KEY UNLOCK” in “Work support”. BCS-20, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)" . Is the inspection result normal? YES >> GO TO 5. NO >> Set “ANS BACK I-KEY UNLOCK” in “Work support”. 5. CHECK HAZARD FUNCTION Check hazard function. DLK-105, "Component Function Check" Is the inspection result normal? YES >> GO TO 6. NO >> Repair or replace the malfunctioning parts. 6. CHECK INTELLIGENT KEY WARNING BUZZER Check Intelligent Key warning buzzer. DLK-107, "Component Function Check" Is the inspection result normal? YES >> GO TO 7. NO >> Repair or replace the malfunctioning parts. 7. REPLACE BCM 1. Replace BCM. Refer to BCS-72, "Removal and Installation" . 2. Confirm the operation after replacement. YES >> Inspection End. |