|
|
Content .. 1278 1279 1280 1281 ..
WCS THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT SOUND WCS-47 < SYMPTOM DIAGNOSIS > C D E F G H I J K L M B A O P THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT Description INFOID:0000000010121645 • Seat belt reminder warning does not sound. • Seat belt reminder warning sounds continuously. Diagnosis Procedure INFOID:0000000010121646 1. CHECK SEAT BELT WARNING LAMP 1. Turn power switch ON. 2. Check the operation of the seat belt warning lamp in the combination meter. Is the inspection result normal? YES >> GO TO 2. NO >> GO TO 4. 2. CHECK BCM OUTPUT SIGNAL 1. Select “BUZZER” of “BCM” using CONSULT. 2. Perform “SEAT BELT WARN TEST” in “ACTIVE TEST”. YES >> Inspection End. NO >> GO TO 3. 3. CHECK COMBINATION METER INPUT SIGNAL Select “Data Monitor” of “METER/M&A” using CONSULT and check the “BUZZER” monitor value. Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-102, "Removal and Installation" NO >> Replace BCM. Refer to BCS-72, "Removal and Installation" 4. CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE) CIRCUIT Check the seat belt buckle switch (driver side) circuit. Refer to . Is the inspection result normal? YES >> GO TO 5. NO >> Repair or replace harness or connector. 5. CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE) Check the seat belt buckle switch (driver side). Refer to WCS-45, "Component Inspection" Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-102, "Removal and Installation" NO >> Replace seat belt buckle (driver side). Refer to SB-14, "SEAT BELT BUCKLE : Removal and Driver seat belt fastened : OFF Driver seat belt unfastened : ON Buzzer active condition : On Buzzer non-active condition : Off |