Nissan Leaf. Manual - part 1086

SEC-106

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

SECURITY INDICATOR LAMP DOES NOT TURN ON OR BLINK

SECURITY INDICATOR LAMP DOES NOT TURN ON OR BLINK

Description

INFOID:0000000010119302

Security indicator lamp does not blink when power switch is in a position other than ON

NOTE:

• Before performing the diagnosis, check “Work Flow”. Refer to 

SEC-62, "Work Flow"

.

• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and

check each symptom.

Conditions of Vehicle (Operating Conditions)

Power switch is not in the ON position.

Diagnosis Procedure

INFOID:0000000010119303

1.

CHECK SECURITY INDICATOR LAMP

Check security indicator lamp.

Refer to 

SEC-103, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-53, "Intermittent Incident"

.

NO

>> GO TO 1.

VEHICLE SECURITY SYSTEM CANNOT BE SET

SEC-107

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

SEC

N

O

P

VEHICLE SECURITY SYSTEM CANNOT BE SET

INTELLIGENT KEY
INTELLIGENT KEY : Description

INFOID:0000000010119304

Armed phase is not activated when all doors are locked using Intelligent Key.

NOTE:

Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDI-

TIONS)” before starting diagnosis, and check each symptom.

CONDITION OF VEHICLE (OPERATING CONDITIONS)

“SECURITY ALARM SET”: ON

Check the setting of “SECURITY ALARM SET” in “Work Support” of “THEFT ALM” in “BCM” using CONSULT.

INTELLIGENT KEY : Diagnosis Procedure (Except for Canada)

INFOID:0000000010119305

1.

CHECK INTELLIGENT KEY SYSTEM (REMOTE KEYLESS ENTRY FUNCTION)

Lock/unlock door with Intelligent Key.

Refer to 

DLK-25, "DOOR LOCK FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check Intelligent Key system (remote keyless entry function). Refer to 

DLK-131, "Diagnosis Pro-

cedure"

.

2.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-53, "Intermittent Incident"

.

NO

>> GO TO 1.

INTELLIGENT KEY : Diagnosis Procedure (For Canada)

INFOID:0000000010119306

1.

CHECK INTELLIGENT KEY SYSTEM (REMOTE KEYLESS ENTRY FUNCTION)

Lock/unlock door with Intelligent Key.

Refer to 

DLK-25, "DOOR LOCK FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check Intelligent Key system (remote keyless entry function). Refer to 

DLK-131, "Diagnosis Pro-

cedure"

.

2.

CHECK HOOD SWITCH

Check hood switch.

Refer to 

SEC-100, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace hood switch.

3.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-53, "Intermittent Incident"

.

NO

>> GO TO 1.

DOOR REQUEST SWITCH
DOOR REQUEST SWITCH : Description

INFOID:0000000010119307

Armed phase is not activated when all doors are locked using door request switch.

SEC-108

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

VEHICLE SECURITY SYSTEM CANNOT BE SET

NOTE:

Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDI-

TIONS)” before starting diagnosis, and check each symptom.

CONDITION OF VEHICLE (OPERATING CONDITIONS)

“SECURITY ALARM SET”: ON

Check the setting of “SECURITY ALARM SET” in “Work Support” of “THEFT ALM” of “BCM” using CONSULT.

DOOR REQUEST SWITCH : Diagnosis Procedure (Except for Canada)

INFOID:0000000010119308

1.

CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)

Lock/unlock door with door request switch.

Refer to 

DLK-25, "DOOR LOCK FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check Intelligent Key system (door lock function). Refer to 

DLK-127, "ALL DOOR REQUEST

SWITCHES : Diagnosis Procedure"

.

2.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-53, "Intermittent Incident"

.

NO

>> GO TO 1.

DOOR REQUEST SWITCH : Diagnosis Procedure (For Canada)

INFOID:0000000010119309

1.

CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)

Lock/unlock door with door request switch.

Refer to 

DLK-25, "DOOR LOCK FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check Intelligent Key system (door lock function). Refer to 

DLK-127, "ALL DOOR REQUEST

SWITCHES : Diagnosis Procedure"

.

2.

CHECK HOOD SWITCH

Check hood switch.

Refer to 

SEC-100, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace hood switch.

3.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-53, "Intermittent Incident"

.

NO

>> GO TO 1.

DOOR KEY CYLINDER
DOOR KEY CYLINDER : Description

INFOID:0000000010119310

ARMED phase is not activated when all doors are locked using mechanical key.

NOTE:

Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check

each symptom.

CONDITION OF VEHICLE (OPERATING CONDITION)

• SECURITY ALARM SET: ON

VEHICLE SECURITY SYSTEM CANNOT BE SET

SEC-109

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

SEC

N

O

P

Check the setting of “SECURITY ALARM SET” in “Work Support” of “THEFT ALM” in “BCM” using CON-

SULT. 

DOOR KEY CYLINDER : Diagnosis Procedure (Except for Canada)

INFOID:0000000010119311

1.

CHECK POWER DOOR LOCK SYSTEM

Lock or unlock doors using mechanical key.

Refer to 

DLK-25, "DOOR LOCK FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check power door lock system. Refer to 

DLK-130, "Diagnosis Procedure"

.

2.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-53, "Intermittent Incident"

.

NO

>> GO TO 1.

DOOR KEY CYLINDER : Diagnosis Procedure (For Canada)

INFOID:0000000010119312

1.

CHECK POWER DOOR LOCK SYSTEM

Lock or unlock doors using mechanical key.

Refer to 

DLK-25, "DOOR LOCK FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check power door lock system. Refer to 

DLK-130, "Diagnosis Procedure"

.

2.

CHECK HOOD SWITCH

Check hood switch.

Refer to 

SEC-100, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace hood switch.

3.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-53, "Intermittent Incident"

.

NO

>> GO TO 1.

DOOR LOCK AND UNLOCK SWITCH
DOOR LOCK AND UNLOCK SWITCH : Description

INFOID:0000000010119313

Armed phase is not activated when all doors are locked by door lock and unlock switch.

NOTE:

Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDI-

TIONS)” before starting diagnosis, and check each symptom.

CONDITION OF VEHICLE (OPERATING CONDITIONS)

“SECURITY ALARM SET”: ON

Check the setting of “SECURITY ALARM SET” in “Work Support” of “THEFT ALM” in “BCM” using CONSULT.

DOOR LOCK AND UNLOCK SWITCH : Diagnosis Procedure (Except for Canada)

INFOID:0000000010119314

1.

CHECK DOOR LOCK FUNCTION

Lock/unlock door using mechanical key inserted into door key cylinder.

Refer to 

DLK-25, "DOOR LOCK FUNCTION : System Description"

.