|
|
Content .. 1030 1031 1032 1033 ..
PWC-46 < DTC/CIRCUIT DIAGNOSIS > DOOR SWITCH 1. Disconnect BCM connector. 2. Check continuity between door switch harness connector and BCM harness connector. 3. Check continuity between door switch harness connector and ground. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-72, "Removal and Installation" NO >> Repair or replace harness. 3. CHECK BACK DOOR SWITCH GROUND CIRCUIT Check continuity between back door lock assembly harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace harness. 4. CHECK DOOR SWITCH PWC-46, "Component Inspection" Is the inspection result normal? YES >> GO TO 5. NO >> Replace malfunctioning door switch. 5. CHECK INTERMITTENT INCIDENT GI-53, "Intermittent Incident" >> Inspection End. Component Inspection INFOID:0000000010503118 1. CHECK DOOR SWITCH 1. Turn power switch OFF. 2. Disconnect malfunctioning door switch connector. 3. Check continuity between door switch terminals. Door switch BCM Continuity Connector Terminal Connector Terminal Front LH B48 3 M29 47 Yes Front RH B49 45 Rear LH B71 48 Rear RH B53 46 Back door D562 43 Door switch Ground Continuity Connector Terminal Front LH B48 3 No Front RH B49 Rear LH B71 Rear RH B53 Back door D562 Back door lock assembly Ground Continuity Connector Terminal D562 4 Yes |