|
|
INL-32 < ECU DIAGNOSIS INFORMATION > BCM (BODY CONTROL MODULE) Fail Safe INFOID:0000000010243293 Fail-safe index BCM performs fail-safe control when any DTC listed below is detected. DTC Inspection Priority Chart INFOID:0000000010243294 If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart. 59 GR Front door lock as- Output OFF OFF (neutral) 0V ON (unlock) Battery voltage 60 LG Turn signal (left) Output ON Turn left ON 61 G Turn signal (right) Output ON Turn right ON 63 BR Interior room/map Output OFF Any door ON (open) 0V OFF (closed) Battery voltage 65 V All door lock actuators Output OFF OFF (neutral) 0V ON (lock) Battery voltage 66 L Front door lock actua- Output OFF OFF (neutral) 0V ON (unlock) Battery voltage 67 B Ground Input ON — 0V 68 SB Power window power Output — Ignition switch ON Battery voltage Within 45 seconds after igni- Battery voltage More than 45 seconds after ig- 0V When front door LH or RH is 0V 70 W Battery power supply Input OFF — Battery voltage Terminal Wire color Signal name Signal input/ output Measuring condition Reference value or waveform (Approx.) Ignition switch Operation or condition SKIA3009J SKIA3009J Display contents of CONSULT Fail-safe Cancellation U1000: CAN COMM CIRCUIT Inhibit engine cranking When the BCM re-establishes communication with the other mod- |