|
|
EXL-148 < SYMPTOM DIAGNOSIS > DAYTIME LIGHT SYSTEM INOPERATIVE DAYTIME LIGHT SYSTEM INOPERATIVE Description INFOID:0000000009484944 The daytime light system is inoperative even though the combination switch (lighting and turn signal switch) and parking brake switch are in the normal setting, also whenever engine is operating. Diagnosis Procedure INFOID:0000000009484945 NOTE: Before performing the diagnosis, check that the following is normal. • High beam lamp function • Parking brake warning lamp • Engine operation status 1. COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INSPECTION Check the combination switch (lighting and turn signal switch). Refer to Is the combination switch (lighting and turn signal switch) normal? YES >> GO TO 2. NO >> Repair or replace the malfunctioning part. 2. CHECK DAYTIME LIGHT REQUEST SIGNAL INPUT CONSULT DATA MONITOR 1. Parking brake switch is released. 2. Start engine. 3. Select "DTRL REQ" of IPDM E/R DATA MONITOR item. 4. While operating the combination switch (lighting and turn signal switch), check the monitor status. Is the item status normal? YES >> GO TO 3. NO >> Replace BCM. Refer to BCS-50, "Removal and Installation" 3. DAYTIME LIGHT RELAY CIRCUIT INSPECTION Check the daytime light relay circuit. Refer to . Is the daytime light relay circuit normal? YES >> Replace IPDM E/R. Refer to PCS-27, "Removal and Installation" NO >> Repair or replace the malfunctioning part. Monitor item Condition Monitor status DTRL REQ combination switch (lighting and turn 1ST or OFF ON Except for 1ST OFF |