|
|
EM-44 < REMOVAL AND INSTALLATION > [VQ40DE] ROCKER COVER 4. Tighten the rocker cover bolts in two steps in numerical order as shown. : Front 5. Install new O-ring and PCV valve to rocker cover (RH), if removed. CAUTION: Do not reuse O-ring. 6. Install PCV hose. • Insert PCV hose by 25 to 30 mm (0.98 to 1.18 in) from connector end. • When installing, be careful not to twist or come in contact with other parts. 7. Installation of the remaining components is in the reverse order of removal. • Check engine oil level and adjust as necessary. Refer to . 1st step : 1.96 N·m (0.20 kg-m, 17 in-lb) 2nd step : 8.33 N·m (0.85 kg-m, 74 in-lb) AWBIA0730ZZ |