|
|
EC-274 < DTC/CIRCUIT DIAGNOSIS > [VQ40DE] P0327, P0328, P0332, P0333 KS 7. DETECT MALFUNCTIONING PART Check the following. • Harness connectors F67, F250 • Harness for open or short between knock sensor and ground >> Repair open circuit or short power in harness or connectors. 8. CHECK INTERMITTENT INCIDENT GI-40, "Intermittent Incident" >> INSPECTION END Component Inspection INFOID:0000000009483975 KNOCK SENSOR Check resistance between knock sensor terminal 1 and ground. NOTE: It is necessary to use an ohmmeter which can measure more than 10 M Ω. CAUTION: Never use any knock sensors that have been dropped or physically damaged. Use only new ones. Resistance: Approximately 532 - 588 k Ω [at 20°C (68°F)] |