|
|
EXCESSIVE ABS FUNCTION OPERATION FREQUENCY BRC-221 < SYMPTOM DIAGNOSIS > [TYPE 2] C D E G H I J K L M A B BRC N O P EXCESSIVE ABS FUNCTION OPERATION FREQUENCY Diagnosis Procedure INFOID:0000000009482868 1. CHECK START Check front and rear brake force distribution using a brake tester. YES >> GO TO 2 NO >> Check brake system. 2. CHECK FRONT AND REAR AXLE Make sure that there is no excessive play in the front and rear axles. Refer to front: or rear: . Is the inspection result normal? YES >> GO TO 3 NO >> Repair or replace malfunctioning components. 3. CHECK WHEEL SENSOR AND SENSOR ROTOR Check the following. • Wheel sensor installation for damage. • Sensor rotor installation for damage. • Wheel sensor connector connection. • Wheel sensor harness inspection. YES >> GO TO 4 NO >> • Replace wheel sensor or sensor rotor. Refer to BRC-232, "Removal and Installation" 233, "Removal and Installation" • Repair harness. 4. CHECK ABS WARNING LAMP DISPLAY Make sure that the ABS warning lamp is turned off after the ignition switch is turned ON or when driving. YES >> Perform self-diagnosis. Refer to BRC-145, "CONSULT Function (ABS)" . NO >> Inspection End. |