|
|
PCS-62 < SYSTEM DESCRIPTION > [POWER DISTRIBUTION SYSTEM] DIAGNOSIS SYSTEM (BCM) INTELLIGENT KEY INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY) INFOID:0000000006069269 WORK SUPPORT CONSULT screen item Indication/Unit Description Vehicle Speed km/h Vehicle speed of the moment a particular DTC is detected Odo/Trip Meter km Total mileage (Odometer value) of the moment a particular DTC is detected Vehicle Condition SLEEP>LOCK Power position status of While turning BCM status from low power consumption mode to SLEEP>OFF While turning BCM status from low power consumption mode to LOCK>ACC While turning power supply position from “LOCK” to “ACC” ACC>ON While turning power supply position from “ACC” to “IGN” RUN>ACC While turning power supply position from “RUN” to “ACC” (Vehicle CRANK>RUN While turning power supply position from “CRANKING” to “RUN” RUN>URGENT While turning power supply position from “RUN“ to “ACC” (Emer- ACC>OFF While turning power supply position from “ACC” to “OFF” OFF>LOCK While turning power supply position from “OFF” to “LOCK” OFF>ACC While turning power supply position from “OFF” to “ACC” ON>CRANK While turning power supply position from “IGN” to “CRANKING” OFF>SLEEP While turning BCM status from normal mode (Power supply posi- LOCK>SLEEP While turning BCM status from normal mode (Power supply posi- LOCK Power supply position is “LOCK” (Ignition switch OFF with steer- OFF Power supply position is “OFF” (Ignition switch OFF with steering ACC Power supply position is “ACC” (Ignition switch ACC) ON Power supply position is “IGN” (Ignition switch ON with engine ENGINE RUN Power supply position is “RUN” (Ignition switch ON with engine CRANKING Power supply position is “CRANKING” (At engine cranking) IGN Counter 0 - 39 The number of times that ignition switch is turned ON after DTC is detected → 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. • The number is fixed to 39 until the self-diagnosis results are erased if it is over 39. Monitor item Description INSIDE ANT DIAGNOSIS This function allows inside key antenna self-diagnosis LOCK/UNLOCK BY I-KEY Door lock/unlock function by door request switch mode can be changed to operation in |