Nissan Almera Tino V10. Manual - part 26

FOREWORD

This manual contains maintenance and repair procedures for NISSAN
ALMERA TINO, model V10 series.

In order to assure your safety and the efficient functioning of the vehicle,
this manual should be read thoroughly. It is especially important that the
PRECAUTIONS in the GI section be completely understood before starting
any repair task.

All information in this manual is based on the latest product information
at the time of publication. The right is reserved to make changes in speci-
fications and methods at any time without notice.

IMPORTANT SAFETY NOTICE

The proper performance of service is essential for both the safety of the
technician and the efficient functioning of the vehicle.
The service methods in this Service Manual are described in such a man-
ner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician and the
tools and parts available. Accordingly, anyone using service procedures,
tools or parts which are not specifically recommended by NISSAN must
first completely satisfy himself that neither his safety nor the vehicle’s
safety will be jeopardized by the service method selected.

NISSAN EUROPE S.A.S.

Service Engineering Section

Paris, France

GENERAL INFORMATION

SECTION

CONTENTS

PRECAUTIONS ...............................................................3

Precautions ..................................................................3

PRECAUTIONS FOR SUPPLEMENTAL
RESTRAINT SYSTEM (SRS)

SEAT BELT PRE-TENSIONER

″

.................................3

PRECAUTIONS FOR NATS (NISSAN ANTI-THEFT
SYSTEM)

..................................................................3

GENERAL PRECAUTIONS

.........................................4

PRECAUTIONS FOR MULTIPORT FUEL
INJECTION SYSTEM OR ENGINE CONTROL
SYSTEM

...................................................................6

PRECAUTIONS FOR THREE WAY CATALYST

...........6

PRECAUTIONS FOR HOSES

.....................................6

PRECAUTIONS FOR ENGINE OILS

...........................7

PRECAUTIONS FOR FUEL

........................................8

PRECAUTIONS FOR AIR CONDITIONING

..................8

HOW TO USE THIS MANUAL........................................9
HOW TO READ WIRING DIAGRAMS.......................... 11

Sample/Wiring Diagram - EXAMPL - ........................ 11

OPTIONAL SPLICE

..................................................12

Description .................................................................13

CONNECTOR SYMBOLS

.........................................15

HARNESS INDICATION

...........................................16

COMPONENT INDICATION

......................................16

SWITCH POSITIONS

...............................................16

DETECTABLE LINES AND NON-DETECTABLE
LINES

.....................................................................17

MULTIPLE SWITCH

.................................................18

REFERENCE AREA

.................................................19

HOW TO PERFORM EFFICIENT DIAGNOSES
FOR AN ELECTRICAL INCIDENT ...............................21

Work Flow..................................................................21
Incident Simulation Tests...........................................22

INTRODUCTION

......................................................22

VEHICLE VIBRATION

..............................................22

HEAT SENSITIVE

....................................................23

FREEZING

..............................................................23

WATER INTRUSION

................................................24

ELECTRICAL LOAD

.................................................24

COLD OR HOT START UP

.......................................24

Circuit Inspection .......................................................24

INTRODUCTION

......................................................24

................25

..............26

...........................................27

VOLTAGE DROP TESTS

..........................................27

CONTROL UNIT CIRCUIT TEST

...............................29

HOW TO FOLLOW TROUBLE DIAGNOSES...............31

How to Follow Test Groups in Trouble Diagnoses....32
Key to Symbols Signifying Measurements or
Procedures.................................................................33

CONSULT-II CHECKING SYSTEM ...............................35

Function and System Application ..............................35
Nickel Metal Hydride Battery Replacement...............36
Checking Equipment..................................................36
CONSULT-II Start Procedure ....................................37
CONSULT-II Data Link Connector (DLC) Circuit ......37

INSPECTION PROCEDURE

.....................................37

IDENTIFICATION INFORMATION ................................38

Model Variation ..........................................................38

PREFIX AND SUFFIX DESIGNATIONS

.....................38

Identification Number.................................................39

VEHICLE IDENTIFICATION NUMBER
ARRANGEMENT

.....................................................39

IDENTIFICATION PLATE

..........................................40

ENGINE SERIAL NUMBER

.......................................40

AUTOMATIC TRANSAXLE NUMBER

........................40

MANUAL TRANSAXLE NUMBER

..............................41

Dimensions ................................................................42
Wheels and Tires.......................................................42

LIFTING POINTS AND TOW TRUCK TOWING ...........43

Preparation ................................................................43

SPECIAL SERVICE TOOLS

......................................43

Board-on Lift ..............................................................43
Garage Jack and Safety Stand .................................44
2-pole Lift ...................................................................45
Tow Truck Towing ......................................................46

TOWING A H.CVT MODEL WITH FOUR WHEELS
ON GROUND

..........................................................46

TOWING A H.CVT MODEL WITH REAR WHEELS
RAISED (WITH FRONT WHEELS ON GROUND)

.......46

IDX

TOWING POINT

.......................................................47

TIGHTENING TORQUE OF STANDARD BOLTS ........48
ISO 15031–2 TERMINOLOGY LIST .............................49

ISO 15031–2 Terminology List ..................................49

CONTENTS

(Cont’d)

GI-2

Precautions

NLGI0001

Observe the following precautions to ensure safe and proper
servicing. These precautions are not described in each indi-
vidual section.

SGI646

PRECAUTIONS FOR SUPPLEMENTAL RESTRAINT
SYSTEM (SRS) “AIR BAG” AND “SEAT BELT
PRE-TENSIONER”

NLGI0001S01

The Supplemental Restraint System such as “AIR BAG” and “SEAT
BELT PRE-TENSIONER” used along with a seat belt, helps to
reduce the risk or severity of injury to the driver and front passen-
ger for certain types of collision. The SRS system composition
which is available to NISSAN MODEL V10 is as follows (The com-
position varies according to the destination and optional equip-
ment.):

For a frontal collision
The Supplemental Restraint System consists of driver air bag
module (located in the center of the steering wheel), front pas-
senger air bag module (located on the instrument panel on
passenger side), front seat belt pre-tensioners, a diagnoses
sensor unit, warning lamp, wiring harness and spiral cable.

For a side collision
The Supplemental Restraint System consists of front side air
bag module (located in the outer side of front seat), side air bag
(satellite) sensor, diagnoses sensor unit (one of components of
air bags for a frontal collision), wiring harness, warning lamp
(one of components of air bags for a frontal collision).

Information necessary to service the system safely is included in
the RS section of this Service Manual.

WARNING:

To avoid rendering the SRS inoperative, which could
increase the risk of personal injury or death in the event
of a collision which would result in air bag inflation, all
maintenance should be performed by an authorized
NISSAN dealer.

Improper maintenance, including incorrect removal and
installation of the SRS, can lead to personal injury caused
by unintentional activation of the system. For removal of
Spiral Cable and Air Bag Module, see the RS section.

Do not use electrical test equipment on any circuit related
to the SRS unless instructed to in this Service Manual.
Spiral cable and wiring harnesses covered with yellow
insulation tape either just before the harness connectors
or for the complete harness are related to the SRS.

PRECAUTIONS FOR NATS (NISSAN ANTI-THEFT
SYSTEM)

NLGI0001S02

NATS will immobilize the engine if someone tries to start it without
the registered key of NATS.
Both of the originally supplied ignition key IDs have been NATS
registered.

IDX

PRECAUTIONS

Precautions

GI-3

Content .. 24 25 26 27 ..