|
|
BCS-22 < SYSTEM DESCRIPTION > DIAGNOSIS SYSTEM (BCM) *: Initial setting WIPER INFOID:0000000006247452 DATA MONITOR ACTIVE TEST WORK SUPPORT * : Initial setting FLASHER INFOID:0000000006247453 DATA MONITOR ILL DELAY SET MODE8 180 sec Sets delay timer function operation time MODE7 150 sec MODE6 120 sec MODE5 90 sec MODE4 60 sec MODE3 30 sec MODE2 OFF MODE1* 45 sec Support Item Setting Description Monitor Item [Unit] Description IGN ON SW [On/Off] Indicates condition of ignition switch ON position. IGN SW CAN [On/Off] Indicates ignition switch ON signal received from IPDM E/R on CAN communication line. FR WIPER HI [On/Off] Indicates condition of front wiper operation of combination switch. FR WIPER LOW [On/Off] FR WIPER INT [On/Off] FR WASHER SW [On/Off] INT VOLUME [1 - 7] FR WIPER STOP [On/Off] Indicates front wiper motor auto stop signal received from IPDM E/R on CAN communica- VEHICLE SPEED [km/h/mph] Indicates vehicle speed signal received from combination meter on CAN communication RR WIPER ON [On/Off] Indicates condition of rear wiper operation of combination switch. RR WIPER INT [On/Off] RR WASHER SW [On/Off] RR WIPER STOP [On/Off] Indicates rear wiper motor auto stop input from rear wiper motor. Test Item Description FR WIPER This test is able to check front wiper operation [Off/INT/Lo/Hi]. RR WIPER This test is able to check rear wiper operation [Off/Oni]. Support Item Setting Description WIPER SPEED SETTING Off* Front wiper intermittent time linked with wiper dial position. On Front wiper intermittent time linked with vehicle speed and wiper dial position. 2011 Pathfinder |