|
|
LAN-86 < COMPONENT DIAGNOSIS > [CAN] ADP BRANCH LINE CIRCUIT ADP BRANCH LINE CIRCUIT Diagnosis Procedure INFOID:0000000003938761 1. CHECK CONNECTOR 1. Turn the ignition switch OFF. 2. Disconnect the battery cable from the negative terminal. 3. Check the following terminals and connectors for damage, bend and loose connection (unit side and con- - Driver seat control unit - Harness connector B200 - Harness connector B37 - Harness connector B69 - Harness connector M40 Is the inspection result normal? YES >> GO TO 2. NO >> Repair the terminal and connector. 2. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect the connector of driver seat control unit. 2. Check the resistance between the driver seat control unit harness connector terminals. Is the measurement value within the specification? YES >> GO TO 3. NO >> Repair the driver seat control unit branch line. 3. CHECK POWER SUPPLY AND GROUND CIRCUIT Check the power supply and the ground circuit of the driver seat control unit. Refer to CONTROL UNIT : Diagnosis Procedure" Is the inspection result normal? YES (Present error)>>Replace the driver seat control unit. Refer to ADP-158, "Removal and Installation" YES (Past error)>>Error was detected in the driver seat control unit branch line. >> Repair the power supply and the ground circuit. Driver seat control unit harness connector Resistance ( Ω ) Connector No. Terminal No. B202 3 19 Approx. 54 – 66 2009 Pathfinder |