|
|
PRECAUTIONS SE-3 C D E F G H J K L M A B SE
2005 Pathfinder PRECAUTIONS PFP:00001 Precautions for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT EIS0044T The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along WARNING: ● To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death ● Improper maintenance, including incorrect removal and installation of the SRS, can lead to per- ● Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Precautions for Work EIS0044U ● When removing or disassembling each component, be careful not to damage or deform it. If a component ● When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the compo- ● Protect the removed parts with a shop cloth and keep them. ● Replace a deformed or damaged clip. ● If a part is specified as a non-reusable part, always replace it with new one. ● Be sure to tighten bolts and nuts securely to the specified torque. ● After re-installation is completed, be sure to check that each part works normally. ● Follow the steps below to clean components. – Water soluble foul: Dip a soft cloth into lukewarm water, and wring the water out of the cloth to wipe the – Oily foul: Dip a soft cloth into lukewarm water with mild detergent (concentration: within 2 to 3%), and wipe ● Do not use organic solvent such as thinner, benzene, alcohol, or gasoline. ● For genuine leather seats, use a genuine leather seat cleaner. |