|
|
MWI COMBINATION METER MWI-67 < ECU DIAGNOSIS > C D E F G H I J K L M B A O P DTC Index INFOID:0000000003792591 Function Specifications Speedometer Reset to zero by suspending communication. Tachometer Water temperature gauge Illumination control When suspending communication, changes to nighttime Information display Door open warning The display turns off by suspending communication. Trunk open warning Parking brake release warning Instantaneous fuel warning • When reception time of an abnormal signal is 2 seconds or less, the last received datum is used for calculation to indi- • When reception time of an abnormal signal is more than two seconds, the last result calculated during normal condition Average fuel consumption Average vehicle speed Travel distance Buzzer The buzzer turns off by suspending communication. Warning lamp/indicator ABS warning lamp The lamp turns on by suspending communication. VDC OFF indicator lamp SLIP indicator lamp Brake warning lamp High beam indicator lamp The lamp turns off by suspending communication. Front fog light indicator lamp Rear fog light indicator lamp Turn signal indicator lamp Light indicator lamp Oil pressure warning lamp Malfunction indicator lamp CRUISE indicator lamp SPORT indicator lamp Key warning lamp Display contents of CONSULT-III Diagnostic item is detected when ... Refer to CAN COMM CIRCUIT When combination meter is not transmitting or receiving CAN communication signal CONTROL UNIT (CAN) When detecting error during the initial diagnosis of the CAN controller of combina- VEHICLE SPEED The abnormal vehicle speed signal is input from the ABS actuator and electric unit ENGINE SPEED If ECM continuously transmits abnormal engine speed signals for 2 seconds or WATER TEMP If ECM continuously transmits abnormal engine coolant temperature signals for 60 |