|
|
содержание .. 598 599 600 601 ..
EC-408 < DTC/CIRCUIT DIAGNOSIS > [VQ35DE] P2122, P2123 APP SENSOR YES >> GO TO 2. NO >> Repair or replace ground connection. 2. CHECK APP SENSOR 1 POWER SUPPLY CIRCUIT 1. Disconnect accelerator pedal position (APP) sensor harness connector. 2. Turn ignition switch ON. 3. Check the voltage between APP sensor harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> Repair open circuit, short to ground or short to power in harness or connectors. 3. CHECK APP SENSOR 1 GROUND CIRCUIT FOR OPEN AND SHORT 1. Turn ignition switch OFF. 2. Disconnect ECM harness connector. 3. Check the continuity between APP sensor harness connector and ECM harness connector. 4. Also check harness for short to ground and short to power. Is the inspection result normal? YES >> GO TO 4. NO >> Repair open circuit, short to ground or short to power in harness or connectors. 4. CHECK APP SENSOR INPUT SIGNAL CIRCUIT FOR OPEN AND SHORT 1. Check the continuity between APP sensor harness connector and ECM harness connector. 2. Also check harness for short to ground and short to power. Is the inspection result normal? YES >> GO TO 5. NO >> Repair open circuit, short to ground or short to power in harness or connectors. 5. CHECK APP SENSOR EC-409, "Component Inspection" Is the inspection result normal? YES >> GO TO 7. NO >> GO TO 6. 6. REPLACE ACCELERATOR PEDAL ASSEMBLY 1. Replace accelerator pedal assembly. 2. EC-409, "Special Repair Requirement" >> INSPECTION END 7. CHECK INTERMITTENT INCIDENT GI-39, "Intermittent Incident" APP sensor Ground Voltage (V) Connector Terminal E110 4 Ground Approx. 5 APP sensor ECM Continuity Connector Terminal Connector Terminal E110 2 E16 84 Existed APP sensor ECM Continuity Connector Terminal Connector Terminal E110 3 E16 81 Existed |