|
|
содержание .. 392 393 394 395 ..
DLK-84 < DTC/CIRCUIT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] B2422 BACK DOOR STATE B2422 BACK DOOR STATE Description INFOID:0000000005517513 The automatic back door control unit counts the pulse signal from the encoder and determines the position of DTC Logic INFOID:0000000005517514 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Operate automatic back door. 3. Check “Self Diagnostic Result” with CONSULT-III. Is DTC detected? YES >> Go to NO >> INSPECTION END Diagnosis Procedure INFOID:0000000005517515 1. CHECK FUNCTION Check half latch switch (“HALF LATCH SW”) in Data Monitor mode. Is the inspection result normal? YES >> GO TO 6. NO >> GO TO 2. 2. CHECK AUTOMATIC BACK DOOR CONTROL UNIT OUTPUT 1. Turn ignition switch OFF. 2. Disconnect back door lock assembly connector. 3. Check voltage between back door lock assembly harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 3. 3. CHECK HALF LATCH SWITCH CIRCUIT 1. Disconnect automatic back door control unit connector. DTC No. Trouble diagnosis name DTC detecting condition Possible cause B2422 BACK DOOR STATE When the automatic power back door control unit • Back door mechanism (Door open and half latch switch is Monitor item Condition Status HALF LATCH SW Back door lock Fully closed/Half latch OFF Open ON (+) (–) Voltage (V) (Approx.) Back door lock assembly Connector Terminal D179 6 Ground Battery voltage |