|
|
содержание .. 16 17 18 19 ..
ADP-64 < DTC/CIRCUIT DIAGNOSIS > TELESCOPIC SWITCH TELESCOPIC SWITCH Description INFOID:0000000005515344 Telescopic switch is equipped to the steering column. The operation signal is inputted to the automatic drive Component Function Check INFOID:0000000005515345 1. CHECK FUNCTION 1. Select “TELESCO SW-FR”, “TELESCO SW-RR” in “Data monitor” mode with CONSULT-III. 2. Check telescopic switch signal under the following conditions. Is the indication normal? YES >> INSPECTION END NO >> Perform diagnosis procedure. Refer to Diagnosis Procedure INFOID:0000000005515346 1. CHECK TELESCOPIC SWITCH SIGNAL 1. Turn ignition switch OFF. 2. Disconnect tilt & telescopic switch connector. 3. Turn ignition switch ON. 4. Check voltage between tilt & telescopic switch harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 2. 2. CHECK TELESCOPIC SWITCH CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect automatic drive positioner control unit connector. 3. Check continuity between automatic drive positioner control unit harness connector and tilt & telescopic 4. Check continuity between automatic drive positioner control unit harness connector and ground. Monitor item Condition Status TELESCO SW-FR Telescopic switch (forward) Operate ON Release OFF TELESCO SW-RR Telescopic switch (backward) Operate ON Release OFF (+) (–) Voltage (V) (Approx.) Tilt & telescopic switch Connector Terminals M102 5 Ground Battery voltage 4 Automatic drive positioner control unit Tilt & telescopic switch Continuity Connector Terminal Connector Terminal M75 7 M102 5 Existed 19 4 |