|
|
содержание .. 13 14 15 16 ..
ADP-52 < DTC/CIRCUIT DIAGNOSIS > POWER SUPPLY AND GROUND CIRCUIT POWER SUPPLY AND GROUND CIRCUIT DRIVER SEAT CONTROL UNIT DRIVER SEAT CONTROL UNIT : Diagnosis Procedure INFOID:0000000005515320 1. CHECK POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. 2. Check voltage between driver seat control unit harness connector and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness. 2. CHECK GROUND CIRCUIT Check continuity between the driver seat control unit harness connector and ground. Is the inspection result normal? YES >> INSPECTION END NO >> Repair or replace harness. DRIVER SEAT CONTROL UNIT : Special Repair Requirement INFOID:0000000005515321 1. PERFORM ADDITIONAL SERVICE Perform additional service when removing battery negative terminal. >> Refer to ADP-8, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL . AUTOMATIC DRIVE POSITIONER CONTROL UNIT AUTOMATIC DRIVE POSITIONER CONTROL UNIT : Diagnosis Procedure INFOID:0000000005515322 NOTE: 1. CHECK POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. 2. Check voltage between automatic drive positioner control unit harness connector and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace harness. (+) (–) Voltage (V) (Approx.) Driver seat control unit Connector Terminals B451 1 Ground Battery voltage Driver seat control unit Ground Continuity Connector Terminal B451 2 Existed (+) (–) Voltage (V) (Approx.) Automatic drive positioner control unit Connector Terminals M104 25 Ground Battery voltage |