|
|
CO-18 < REMOVAL AND INSTALLATION > RADIATOR Install each radiator upper clips on radiator core connection as follows: 1. Install each mounting rubbers (upper) (1) on mounting pins (A) 2. Align each radiator upper clips (2) with radiator core connection 3. After connecting each radiator upper clips, use the following to radiator core connections. • Move each radiator upper clips and the radiator forward and backward to check they are securely con- nected. Radiator hose CAUTION: • Use genuine mounting bolts for the cooling fan assembly and strictly observe the tightening torque. (Breakage prevention for radiator) NOTE: • For the orientation of the hose clamp pawl, refer to the figure. *Refer to the illustrations for the specific position each hose clamp tab. : Vehicle front JPBIA1690ZZ Unit mm (in) A. Radiator side B. Engine side JPBIA4294GB Radiator hose Hose end Paint mark Position of hose clamp* Radiator hose (upper) Radiator side Right side C Radiator pipe radiator side No marking B Radiator pipe engine side No marking C Engine side Upper D Radiator hose (lower) Radiator side Upper A Radiator pipe radiator side No marking A Radiator pipe engine side No marking A Engine side Upper E Revision: 2013 February 2012 MURANO |