|
|
CAN SYSTEM (TYPE 10) LAN-345 [CAN] C D E F G H I J L M A B LAN Revision: 2004 November 2004 Murano 2. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect TCM connector. 2. Check resistance between TCM harness connector F103 termi- OK or NG OK >> Replace TCM. NG >> Repair harness between TCM and ECM. Display Control Unit Circuit Check AKS00AHL 1. CHECK CONNECTOR 1. Turn ignition switch OFF. 2. Disconnect the negative battery terminal. 3. Check terminals and connector of display control unit for damage, bend and loose connection (control unit OK or NG OK >> GO TO 2. NG >> Repair terminal or connector. 2. CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect display control unit connector. 2. Check resistance between display control unit harness connec- OK or NG OK >> Replace display control unit. NG >> Repair harness between display control unit and data link connector. Data Link Connector Circuit Check AKS00AHM 1. CHECK CONNECTOR 1. Turn ignition switch OFF. 2. Disconnect the negative battery terminal. 3. Check data link connector and terminals for damage, bend and loose connection (connector side and har- OK or NG OK >> GO TO 2. NG >> Repair terminal or connector. 5 (L) - 6 (Y) : Approx. 54 - 66 Ω PKIA0817E 25 (L) - 26 (Y) : Approx. 54 - 66 Ω SKIA6884E |