|
|
LAN-798 [CAN] CAN SYSTEM (TYPE 23) Revision; 2004 April 2003 Murano 7. CHECK HARNESS FOR SHORT CIRCUIT Check continuity between harness connector B4 terminals 3 (L), 10 OK or NG OK >> GO TO 8. NG >> Check the following harnesses. If any harness is dam- aged, repair the harness. ● Repair harness between harness connector B4 and ● Repair harness between harness connector B4 and harness connector B9. 8. CHECK HARNESS FOR SHORT CIRCUIT 1. Disconnect driver seat control unit connector. 2. Check continuity between driver seat control unit harness con- OK or NG OK >> GO TO 9. NG >> Repair harness between driver seat control unit and har- ness connector B301. 9. CHECK HARNESS FOR SHORT CIRCUIT Check continuity between driver seat control unit harness connector OK or NG OK >> GO TO 10. NG >> Repair harness between driver seat control unit and har- ness connector B301. 3 (L) - Ground : Continuity should not exist. 10 (Y) - Ground : Continuity should not exist. SKIA5022E 3 (L/Y) - 19 (BR/W) : Continuity should not exist. SKIA5024E 3 (L/Y) - Ground : Continuity should not exist. 19 (BR/W) - Ground : Continuity should not exist. SKIA5025E |