|
|
содержание .. 701 702 703 704 ..
EXL-224 < DTC/CIRCUIT DIAGNOSIS > [HALOGEN TYPE] HEADLAMP (HI) CIRCUIT Does continuity exist? YES >> GO TO 5. NO >> Repair the harnesses or connectors. 3. CHECK HEADLAMP (HI) FUSE 1. Turn the ignition switch OFF. 2. Check that the following fuses are not fusing. Is the fuse fusing? YES >> GO TO 4. NO >> Replace IPDM E/R. 4. CHECK HEADLAMP HIGH (HI) SHORT CIRCUIT 1. Disconnect IPDM E/R connector. 2. Check continuity between the IPDM E/R harness connector terminal and the ground. Does continuity exist? YES >> Repair the harnesses or connectors. And then replace the fuse. NO >> Replace the fuse. (Replace IPDM E/R if the fuse is fusing again.) 5. CHECK HEADLAMP (HI) GROUND OPEN CIRCUIT 1. Turn the ignition switch OFF. 2. Disconnect the headlamp high connector. 3. Check continuity between the headlamp high harness connector and ground. Does continuity exist? YES >> Replace the headlamp (HI) bulb. (Bulb socket is abnormally.) NO >> Repair the harnesses or connectors. IPDM E/R Headlamp high Continuity Connector Terminal Connector Terminal RH E345 89 E317 1 Existed LH 90 E316 1 Unit Location Fuse No. Capacity Headlamp HI (RH) IPDM E/R #55 10 A Headlamp HI (LH) IPDM E/R #54 10 A IPDM E/R Ground Continuity Connector Terminal RH E345 89 Not existed LH 90 Headlamp high Ground Continuity Connector Terminal RH E317 2 Existed LH E316 2 |