Nissan Murano. Manual - part 418

TAKE AWAY WARNING DOES NOT OPERATE

DLK-283

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

7.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-131, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 8.

NO

>> Repair or replace the malfunctioning parts.

8.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

ANY DOOR OPEN TO ALL DOORS CLOSED

ANY DOOR OPEN TO ALL DOORS CLOSED : Description

INFOID:0000000009719172

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-10, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-37, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

ANY DOOR OPEN TO ALL DOORS CLOSED : Diagnosis Procedure

INFOID:0000000009719173

1.

CHECK DOOR SWITCH

Check door switch (driver side).
Refer to 

DLK-97, "WITH AUTOMATIC BACK DOOR : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-135, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-91, "DTC Logic"

 (console).

Refer to 

DLK-93, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

PUSH-BUTTON IGNITION SWITCH OPERATION

DLK-284

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

TAKE AWAY WARNING DOES NOT OPERATE

PUSH-BUTTON IGNITION SWITCH OPERATION : Description

INFOID:0000000009719174

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-10, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-37, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

PUSH-BUTTON IGNITION SWITCH OPERATION : Diagnosis Procedure

INFOID:0000000009719175

1.

CHECK POWER POSITION

Check if ignition switch position is changing or not.

Does ignition switch position change?

YES

>> GO TO 2.

NO

>> Check DTC for BCM. Refer to 

BCS-91, "DTC Index"

.

2.

CHECK PUSH-BUTTON IGNITION SWITCH

Check push-button ignition switch.
Refer to 

PCS-67, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Refer to 

DLK-136, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-135, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-91, "DTC Logic"

 (console).

Refer to 

DLK-93, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

TAKE AWAY THROUGH WINDOW

TAKE AWAY THROUGH WINDOW : Description

INFOID:0000000009719176

NOTE:

TAKE AWAY WARNING DOES NOT OPERATE

DLK-285

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-10, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-37, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

TAKE AWAY THROUGH WINDOW : Diagnosis Procedure

INFOID:0000000009719177

1.

CHECK POWER POSITION

Check if ignition switch position is changing or not.
Does ignition switch position change?

YES

>> GO TO 2.

NO

>> Check DTC for BCM. Refer to 

BCS-91, "DTC Index"

.

2.

CHECK “TAKE OUT FROM WIN WARN” SETTING IN “WORK SUPPORT”

Check “TAKE OUT FROM WIN WARN” setting in “WORK SUPPORT”.
Refer to 

DLK-57, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “TAKE OUT FROM WIN WARN” setting in “WORK SUPPORT”.

3.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-135, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-91, "DTC Logic"

 (console).

Refer to 

DLK-93, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-131, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

INTELLIGENT KEY IS REMOVED FROM KEY SLOT

INTELLIGENT KEY IS REMOVED FROM KEY SLOT : Description

INFOID:0000000009719178

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-10, "Work

Flow"

.

DLK-286

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

TAKE AWAY WARNING DOES NOT OPERATE

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-37, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

INTELLIGENT KEY IS REMOVED FROM KEY SLOT : Diagnosis Procedure

INFOID:0000000009719179

1.

CHECK KEY SLOT

Check key slot.
Refer to 

DLK-129, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-135, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-91, "DTC Logic"

 (console).

Refer to 

DLK-93, "DTC Logic"

 (luggage room).

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-131, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.