содержание .. 1331 1332 1333 1334 ..
Nissan Murano. Manual - part 1333
ST-26
< SYMPTOM DIAGNOSIS >
[WITH HEATED STEERING WHEEL]
HEATED STEERING WHEEL SWITCH INDICATOR LAMP DOES NOT TURN ON
HEATED STEERING WHEEL SWITCH INDICATOR LAMP DOES NOT
TURN ON
Description
INFOID:0000000009721474
• Heated steering wheel switch indicator lamp does not turn on the lamp.
• Heated steering wheel switch indicator lamp does not turn off the lamp.
Diagnosis Procedure
INFOID:0000000009721475
1.
CHECK POWER SOURCE AND GROUND CIRCUIT
1.
Turn ignition switch ON.
CAUTION:
Never start the engine.
2.
Turn heated steering wheel switch ON.
3.
Check voltage between heated steering wheel switch harness connector terminals.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> GO TO 2.
2.
CHECK POWER SUPPLY (BATTERY)
Check the following.
• Battery
• Harness for short or open between battery and 15 A fuse (No.26).
• 15 A fuse (No.26).
• Harness for short or open between 15 A fuse (No.26) and heated steering wheel relay.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace damaged parts.
3.
CHECK GROUND CIRCUIT
Check continuity between heated steering wheel switch harness connector terminal and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace damaged parts.
4.
CHECK HARNESS BETWEEN HEATED STEERING WHEEL RELAY AND HEATED STEERING WHEEL
SWITCH
1.
Turn ignition switch OFF.
2.
Disconnect heated steering wheel relay connector. Refer to
ST-19, "Component Inspection (Heated
3.
Disconnect heated steering wheel switch connector. Refer to
ST-66, "Removal and Installation"
.
4.
Check continuity between heated steering wheel relay harness connector terminal and heated steering
wheel switch harness connector terminal.
Heated steering wheel
Condition
Voltage (Approx.)
Connector
Terminal
M28
5
−
6
Within 30 minutes after
turning ON the heated
steering switch.
Battery voltage
Other conditions.
0 V
Heated steering wheel switch
Ground
Continuity
Connector
Terminal
M28
6
Existed